JIS B 0002-3

Technical drawings—Screw threads and threaded parts—Part 3 : Simplified representation

English 1998
0.000
JIS
Detailed Information

This part of JIS B 0002 establishes rules for the simplified representation of threaded parts, with the exception of screw thread inserts, which are covered in JIS B 0002-2. This representation is applicable when it is not necessary to show the exact shape and details of the parts (see JIS B 0002-1), for example in assembly drawings.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 6331
1991
English

Hexagon collar nuts with a height of 1,5 d

This standard specifies hexagon nuts designed for use without washers, in assemblies that will be frequently disassembled and reassembled.
ISO
ISO 3800-1
1977
English

Threaded fasteners – Axial load fatigue testing – Part 1 : Test methods

This International Standard specifies the conditions for carrying out axial load fatigue tests on threaded fasteners.
DIN
DIN 315
1983
English

Wing nuts

The following amendments have been made in comparison with the December 1972 edition: a) The dimensions of the wing nuts have been altered in some respects. b) Limiting sizes have been adop […]
ASTM
ASTM F812/F812M
1997
English

Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series

1.1 This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of metric-series nuts with nominal […]
DIN
DIN 6923
1983
English

Hexagon nuts with flange

This standard gives specifications for hexagon nuts with flange, with metric coarse or fine thread with diameters from 5 to 20 mm, assigned to product grade A. If, in special cases, nuts ar […]
DIN
DIN 6915
1999
English

Steel hexagon nuts with large width across flats for high-strength structural bolting

This standard specifies dimensions and technical delivery conditions for steel hexagon nuts with large width across flats for use with DIN 6914 high-strength bolting in friction grip and sh […]
Custom
John Deere | JDM F13
2015
English

Specification for Non-Electrolytically Applied Zinc Flake Coatings

1.1 JDM F13 specifies requirements for nine grades of corrosion resistant non-electrolytically applied zinc flake coatings on ferrous parts, with three levels of corrosion resistance, and t […]
ANSI
ANSI B18.2.3.7M
1995
English

METRIC HEAVY HEX STRUCTURAL BOLTS

1.1 This standard covers the complete general and dimensional data for metric heavy hex structural bolts recognized as American National Standard. 1.2 The inclusion of dimensional data in t […]
DIN
DIN 915
1980
English

Hexagon socket set screws with dog point – ISO 4028 modified

ISO 4028 specifies product grade A hexagon socket set screws with dog points with metric dimension and thread diameters from 1,6 up to and including 24 mm.