Showing 1 - 20 of 20
NASM
NASM 51959
1999
English

SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 82°, CROSS-RECESSED, CORROSION-RESISTANT STEEL, UNC-2A

MATERIAL: AUSTENITIC CORROSION-RESISTANT STEEL SCREWS SHALL BE MANUFACTURED FROM TYPE 302 (UNS S30200), TYPE 304 (UNS S30400). TYPE 304L (UNS S30403). TYPE 305 (UNS S30500), TYPE 316 (UNS 5 […]
NASM
NASM 51958
1999
English

SCREW, MACHINE PAN-HEAD, CROSS-RECESSED, CORROSION RESISTING STEEL, UNF-2A

MATERIAL: STEEL, CORROSION-RESISTING, 300 SERIES AS SPECIFIED IN QQ-S-763 AND FED-STD-66, COMPOSITION 304 OR 316 OR EQUAL TO OR INTERCHANGEABLE WITH 16:18 OR 18:8 CHROMIUM-NICKEL ALLOY STEEL
NASM
NASM 51021
1998
English

SETSCREW-HEXAGON SOCKET, CUP POINT, CORROSION-RESISTING STEEL, PASSIVATED, UNC-3A, PLAIN AND SELF-LOCKING

SELF-LOCKING ELEMENT: (a) THE SELF-LOCKING ELEMENT SHALL BE IN ACCORDANCE WITH MIL-F-18240. (b) FOR DESIGN AND USAGE LIMITATIONS, SEE MS15981. (c) LOCATION OF EFFECTIVE LOCKING AREA SHALL B […]
NASM
NASM 35650
2002
English

NUT, PLAIN, HEXAGON, MACHINE SCREW, UNF-2B

MAGNETIC PERMEABILITY: CORROSION RESISTANT STEEL FASTENERS SHALL HAVE A MAGNETIC PERMEABILITY OF 2.00 MAXIMUM (AIR = 1.00) AT A FIELD STRENGTH OF H = 200 OERSTEDS USING A MAGNETIC INDICATOR […]
NASM
NASM 35649
2002
English

NUT, PLAIN, HEXAGON, MACHINE SCREW UNC-2B

MATERIAL: STEEL, CARBON, SHALL BE IN ACCORDANCE WITH PROCUREMENT SPECIFICATION. STEEL, CORROSION RESISTANT, SERIES 302 THRU 305 (UNS S30200 THRU UNS S30500), AND TYPES 316 (UNS S31600), 317 […]
NASM
NASM 35338
2002
English

WASHER, LOCK-SPRING, HELICAL, REGULAR (MEDIUM) SERIES

a. CARBON STEEL WASHERS SHALL HAVE A HARDNESS OF 38 TO 46HRC. b. CORROSION-RESISTANT STEEL WASHERS TYPE 420 (UNS S42000) SHALL HAVE A HARDNESS OF 45-53 HRC, AND TYPE 300 (UNS S3XXXX) SERIES […]
NASM
NASM 35333
2003
English

WASHER, LOCK, FLAT-INTERNAL TOOTH

MATERIAL: Carbon Steel, Grade 1050 to 1064. hardness 40 to 50 HRC or equivalent. Corrosion-Resistant Steel, Composition 410. Corrosion-resistant Steel, 300 series (UNS S300XX), hardness 35- […]
NASM
NASM 35307
1999
English

SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, CORROSION RESISTING, PASSIVATED, UNC-2A

MECHANICAL PROPERTIES: The minimum tensile strength in load pounds, indicated in Table I is based on 80,000 PSI Minimum Tensile Strength for diameters through .625 inch and 70,000 PSI Minim […]
NASM
NASM 35275
1999
English

SCREW, MACHINE-DRILLED FILLISTER HEAD, SLOTTED, CORROSION RESISTING STEEL, PASSIVATED, UNC-2A

DRILLED HOLE IS TO BE APPROXIMATELY AT RIGHT ANGLES TO THE SLOT AND MAY BE PERMITTED TO BREAK THROUGH THE BOTTOM OF THE SLOT. ALL SHARP EDGES SHALL BE REMOVED.
NASM
NASM 35206
2004
English

SCREW, MACHINE-PAN HEAD, CROSS-RECESSED, CARBON STEEL, CADMIUM PLATED, UNC-2A

THREADS SHALL BE IN ACCORDANCE WITH FED-STD-H28/2. ACCEPTABILITY OF SCREW THREADS SHALL BE IN ACCORDANCE WITH FED-STD-H28/20, SYSTEM 21.
NASM
NASM 24693
1999
English

SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 100°, CROSS RECESSED, UNC-2A AND UNF-2A

MATERIAL CODE: "A" BEFORE DASH NUMBER - ANODIZED, ALUMINUM ALLOY SCREW. "B" BEFORE DASH NUMBER - UNCOATED, BRASS SCREW. "BB" BEFORE DASH NUMBER - BLACK CHEMICAL FINISH, BRASS SCREW. "C" BEF […]
NASM
NASM 24671
1998
English

SCREW, CAP, SOCKET HEAD, FLAT COUNTERSUNK, 82°, CORROSION-RESISTING STEEL, UNC-3A

MATERIAL: STEEL CORROSION-RESISTING, IN ACCORDANCE WITH FED. STD No 66; AISI 302. 303. 304, 305. 316 OR 384 (DEVELOPED FOR COLD HEADING). MINIMUM ULTIMATE TENSILE STRENGTH SHALL BE 80.000 P […]
NASM
NASM 21266
1999
English

GROMMET, PLASTIC, EDGING

MATERIAL: NYLON PER SPECIFICATION ASTM D4066, TYPE 1. POLYTETRAFLUOROETHYLENE (TFE) PER SPECIFICATION ASTM D1457. POLYFLUOROETHYLENEPROPYLENE (FEP) PER SPECIFICATION ASTM D2116.
NASM
NASM 21043
2003
English

NUT, SELF-LOCKlNG, 800°F, REDUCED HEXAGON, REDUCED HEIGHT, RING BASE, CORROSION RESISTANT STEEL

MATERIAL: CORROSION AND HEAT RESISTANT STEEL PER AMS 5525 (A286), AMS 5731 (A286), OR AMS 5732.
NASM
NASM 16996
1998
English

SCREW, CAP, SOCKET HEAD-HEXAGON, CORROSION RESISTANT STEEL, UNF-3A

CORROSION RESISTANT STEEL, TYPES 302 (UNS S30200), 303 (UNS S30300), 304 (UNS S30400), 302HQ (UNS S30430), 305 (UNS S30500), AND 316 (UNS S31600), IN ACCORDANCE WITH PROCUREMENT SPECIFICATION.
NASM
NASM 16995
1998
English

SCREW, CAP, SOCKET HEAD-HEXAGON, CORROSION RESISTANT STEEL, UNC-3A

The minimum tensile strength in load pounds, indicated for each size in Table I, is based on 80.000 PSI minimum tensile strength. Load pounds are calculated by the stress areas indicated in […]
NASM
NASM 16562
1998
English

PIN, SPRING-TUBULAR, SLOTTED

MATERIAL: STEEL, CARBON, GRADE 1070 THRU 1095 (UNS G10700 THRU G10950) IN ACCORDANCE WITH PROCUREMENT SPECIFICATION. STEEL, CORROSION-RESISTANT, TYPES 410(UNS S41000) AND 420(UNS S42000) IN […]
NASM
NASM 16555
1999
English

PIN, STRAIGHT, HEADLESS (DOWEL) (.0002 OVER NOMINAL SIZE)

CARBON OR ALLOY STEEL PINS SHALL HAVE A CORE HARDNESS OF 47-58 HRC, AND A CASE HARDNESS OF 60 HRC MINIMUM. THE CORE HARDNESS OF THE PINS SHALL NOT IN ANY INSTANCE EXCEED THE CASE HARDNESS. […]
NASM
NASM 16535
1999
English

RIVET-TUBULAR, OVAL HEAD

DOUBLE SHEAR STRENGTH CARBON STEEL RIVETS 32,000 PSI MIN. BRASS RIVETS 35,000 PSI MIN. ALUMINUM RIVETS (2117) 26,000 PSI MIN. ALUMINUM RIVETS (5056) 24,000 PSI MIN. NICKEL ALLOY (MONEL) RIV […]
NASM
NASM 3213
1998
English

SCREWS, MACHINE, PAN HEAD, CROSS-RECESSED, SELF-SEALING, INTEGRAL FLUOROSILICONE O-RING, PLAIN AND SELF-LOCKING

(a) SCREW: CORROSION-RESISTING STEEL (CRES) IN ACCORDANCE WITH MIL-S-82496. (b) 0-RING: FLUOROSILICONE RUBBER, COMPOSITION B IN ACCORDANCE WITH MIL-S-82496 (RESISTANT TO MIL-H-5606 HYDRAULI […]