NASM 35206
SCREW, MACHINE-PAN HEAD, CROSS-RECESSED, CARBON STEEL, CADMIUM PLATED, UNC-2A
English
2004
0.000
Detailed Information
THREADS SHALL BE IN ACCORDANCE WITH FED-STD-H28/2. ACCEPTABILITY OF SCREW THREADS SHALL BE IN
ACCORDANCE WITH FED-STD-H28/20, SYSTEM 21.
Download File
(Log in to download spec.)
Check out other specifications
2010
English
STAINLESS STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS
1.1 This specification covers the chemical and mechanical requirements for stainless steel inch hexagon socket button (SBHCS) and flat countersunk (SFHCS) head cap screws with nominal thread 0.060 through 0.625 in. intended for use in applications requiring general corrosion resistance. 1.2 Two ...
2005
English
Corrosion Protective Coatings Phosphate/Electro-Organic
This specification covers the basic requirements for a black corrosion protective coating which is produced by the use of the bulk electrodeposition process or, if the parts do not lend themselves to barrel processing, the parts may be racked prior to the electrodeposition process. The process in...
2008
English
Prevailing torque type steel nuts — Mechanical and performance properties (ISO 2320:2008)
This International Standard specifies the mechanical and performance properties for prevailing torque type steel nuts when tested at an ambient temperature range of +10 °C to +35 °C. It includes a single test to determine the prevailing torque properties (performance properties) and/or the torque...
2007
English
TORQUE-TENSION REQUIREMENTS FOR PREVAILING-TORQUE TYPE STEEL HEX AND HEX FLANGE NUTS
This standard covers torque-tension requirements for two types of plating: 0.0002/0.0004 in. thickness electrodeposited cadmium plated and lubricated Grades B and C prevailing-torque type steel hex nuts in sizes 1/4 to 1 in., inclusive, and Grades F and G prevailing-torque type steel hex flange n...
1990
English
METRIC HEXAGON KEYS AND BITS
1.1.1 This standard contains the complete dimensional, mechanical and performance requirements for metric series hexagon keys and bits of nominal sizes from 0.7 mm to 36 mm recognized as "American National Standard." They are primarily intended to be used for tightening and loosening metric serie...
1997
English
ALLOY STEEL SOCKET HEAD CAP SCREWS [METRIC)
1.1 This specification covers the requirements for quenched and tempered alloy steel socket head cap screws 1.6 mm through 48 mm in diameter having a minimum ultimate tensile strength of 1220 MPa.