DIN EN Archives - Fasten.one

1994

English

Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding – Joint preparation for steel (ISO 9692:1992) English version of DIN EN 29692

This International Standard pertains to types of joint preparation for metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding on steel (see clauses 3 and 4). [...]

1991

English

Mechanical properties of fasteners – Nonferrous metal bolts, screws, studs and nuts (ISO 8839 : 1986) (English version of DIN EN 28 839)

This International Standard specifies the mechanical properties of bolts, screws, studs and nuts - with nominal thread diameters, d, from M1,6 to M39 inclusive; - with metric ISO thread in acco [...]

1992

English

Hexagon head bolts with metric fine pitch thread – Product grades A and B (ISO 8765 : 1988) English version of DIN EN 28 765

This International Standard gives specifications for hexagon head bolts with metric fine pitch thread with nominal thread diameters d from 8 to 64 mm of product grade A for nominal thread diame [...]

1993

English

Slotted spring-type straight pins (ISO 8752: 1987) English version of DIN EN 28 752

This International Standard specifies the characteristics of slotted spring-type straight pins with metric dimensions and nominal diameters, d1, from 1 to 50 mm Inclusive.

1992

English

Coiled, light duty spring-type straight pins (ISO 8751 : 1987) English version of DIN EN 28 751

This International Standard specifies the characteristics of light duty coiled spring-type straight pins with metric dimensions and nominal diameters, d1, from 1,5 to 8 mm inclusive.

1992

English

Coiled, standard duty spring-type straight pins (ISO 8750 : 1987) English version of DIN EN 28 750

This International Standard specifies the characteristics of standard duty coiled spring-type straight pins with metric dimensions and nominal diameters, d1, from 0,8 to 20 mm inclusive.

1992

English

Determination of shear strength of pins (ISO 8749 : 1986) English version of DIN EN 28 749

This International Standard specifies the test method for shear testing of metallic pins with nominal diameters from 0,8 to 25 mm inclusive.

1992

English

Coiled, heavy duty spring-type straight pins (ISO 8748 : 1987) English version of DIN EN 28 748

This International Standard specifies the characteristics of heavy duty coiled spring-type straight pins with metric dimensions and nominal diameters, d1, from 1,5 to 20 mm inclusive.

1992

English

Grooved pins with countersunk head (ISO 8747 : 1986) English version of DIN EN 28 747

This International Standard specifies the characteristics of countersunk head grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with metri [...]

1992

English

Grooved pins with round head (ISO 8746 : 1986) English version of DIN EN 28 746

This International Standard specifies the characteristics of round head grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with metric dime [...]

1992

English

Half-length taper grooved pins (ISO 8745 : 1986) English version of DIN EN 28 745

This International Standard specifies the characteristics of half-length taper grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with metr [...]

1992

English

Full-length taper grooved pins (ISO 8744 : 1986) English version of DIN EN 28 744

This international Standard specifies the characteristics of full-length taper grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with metr [...]

1992

English

Half-length centre grooved pins (ISO 8743 : 1986) English version of DIN EN 28 743

This International Standard specifies the characteristics of half-length centre grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with met [...]

1992

English

Third-length centre grooved pins (ISO 8742 : 1986) English version of DIN EN 28 742

This International Standard specifies the characteristics of third-length centre grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with me [...]

1992

English

Half-length reverse taper grooved pins (ISO 8741 : 1986) English version of DIN EN 28 741

This International Standard specifies the characteristics of half-length reverse taper grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, w [...]

1992

English

Full-length parallel grooved pins, with chamfer (ISO 8740 : 1986) English version of DIN EN 28 740

This International Standard specifies the characteristics of full-length parallel grooved pins with chamfer which have three equally spaced grooves impressed longitudinally on their exterior su [...]

1992

English

Full-length parallel grooved pins, with pilot (ISO 8739 : 1986) English version of DIN EN 28 739

This International Standard specifies the characteristics of full-length parallel grooved pins with pilot which have three equally spaced grooves impressed longitudinally on their exterior surf [...]

1992

English

Plain washers for use with clevis pins, product grade A (ISO 8738 : 1986) English version of DIN EN 28 738

This International Standard specifies the characteristics of plain washers for clevis pins according to ISO 2340 and ISO 2341. Plain washers in accordance with this International Standard shal [...]

1992

English

Unhardened taper pins with external thread (ISO 8737 : 1986) English version of DIN EN 28 737

This International Standard specifies the characteristics of unhardened taper pins with external thread, and metric dimensions and nominal diameters, d1, from 5 to 50 mm inclusive.

1992

English

Unhardened taper pins with internal thread (ISO 8736 : 1986) English version of DIN EN 28 736

This International Standard specifies the characteristics of unhardened taper pins with internal thread, and metric dimensions and nominal diameters, d1, from 6 to 50 mm inclusive.