ABSTRACT OF ASME B1.3

SCREW THREAD GAGING SYSTEMS FOR ACCEPTABILITY: INCH AND METRIC SCREW THREADS (UN, UNR, UNJ, M, AND MJ)

English 2007
0.000
ASME
Detailed Information

(a) This Standard presents screw thread gaging systems suitable for determining the acceptability of inch UN, UNR, and UNJ screw threads on externally and internally threaded products. It establishes the criteria for screw thread acceptance when a gaging system is used.

(b) A screw thread gaging system comprises a list of screw thread characteristics that must be inspected/evaluated to establish the acceptability of the screw threads on a threaded product and the gage(s) which shall be used when inspecting/evaluating those characteristics.

(c) Federal Government Use. This Standard is approved by the Department of Defense and federal agencies, and is incorporated into FED-STD-H28/20, Screw Thread Standards for Federal Services, Section 20. The use of this Standard by the federal government is subject to all the requirements and limitations of FED-STD-H28/20.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 921
1986
English

Slotted pan head screws with large head

The following amendments have been made in comparison with the August 1972 edition. a) Size M1,8 has been deleted because there is no demand for it. b) The previous design m as specified in […]
DIN
DIN 440
2001
English

Washers with square hole for use in timber constructions

This standard specifies dimensions and technical delivery conditions for washers with square hole, with extra large outside diameter, of product grade C, designed for use with bolt/nut asse […]
DIN
DIN 186
1988
English

T-head bolts with square neck

This standard specifies M 6 to M 48 T·head bolts with square neck. They are designed for use in attaching components to foundations or similar structures by means of T·slots (such as are sp […]
ISO
ISO 1234
1976
English

Split pins – Metric series

This International Standard specifies the dimensions of split pins of the metric series.
NASM
NASM 16535
1999
English

RIVET-TUBULAR, OVAL HEAD

DOUBLE SHEAR STRENGTH CARBON STEEL RIVETS 32,000 PSI MIN. BRASS RIVETS 35,000 PSI MIN. ALUMINUM RIVETS (2117) 26,000 PSI MIN. ALUMINUM RIVETS (5056) 24,000 PSI MIN. NICKEL ALLOY (MONEL) RIV […]
BS
BS 3643-1
1981
English

Specification for ISO metric screw threads — Part 1: Principles and basic data

This Part of this British Standard specifies the principles and basic data for single-start, parallel screw threads having the ISO basic profile for triangular screw threads. Data for 1,0 m […]
3.01
EN
EN 10088-3
1995
English

Stainless steels – Part 3: Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes

1.1 This part of EN 10088 specifies the technical delivery conditions for semi-finished products, hot or cold formed bars, rods and sections of standard grades and special grades of stainle […]
BS EN
BS EN 20898-2
1994
English

Mechanical properties of fasteners – Part 2: Nuts with specified proof load values – Coarse thread

This International Standard specifies the mechanical properties of nuts with specified proof load values when tested at room temperature (see ISO 1). Properties will vary at higher and lowe […]
ANSI
ANSI B18.2.4.5M
1990
English

METRIC HEX JAM NUTS

1.1 This standard covers the complete general and dimensional data for metric hex jam nuts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard i […]