BS EN 14399-1

High-strength structural bolting assemblies for preloading Part 1: General requirements

English 2015
0.000
BS EN
Detailed Information

This European Standard specifies the general requirements for bolt/nut/washer(s) assemblies for high-strength
structural bolting, which are suitable for preloading.

The intended use of bolting assemblies in accordance with this European Standard is structural metallic works.

NOTE 1 High-strength structural bolting assemblies in accordance with EN 14399-2 to EN 14399-10 are designed to
fulfil the requirements of this European Standard.
NOTE 2 High-strength structural bolting assemblies are suitable for preloading in accordance with EN 1090-2 in steel
structures.

High-strength structural bolting assemblies smaller than M12 are not designed to be preloaded.

High-strength structural bolting assemblies are not designed to be welded.

Railway rail fasteners are not covered by this standard.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 1481
1983
English

Slotted pan head tapping screws

This International Standard specifies the characteristics of slotted pan head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.
DIN
DIN 963
1970
English

Slotted Countersunk (Flat) Head Screws (Countersunk Heads according to ISO)

Intermediate length should as for as possible be avoided. Lengths over 100 mm should be arranged in 10 mm steps. Normally these screws are manufactured in the sizes characterized by the qu […]
ASTM
ASTM F1077
1995
English

Standard Guide for Selection of Committee F-16 Fastener Specifications

1.1 This guide is intended to provide a rapid, easy to use method for identifying Committee F-16 fastener specifications and their applicable marking requirements.
DIN
DIN 466
1986
English

Knurled nuts with collar

The following amendments have been made in comparison with the November 1970 edition. a) The content of the standard has been editorially revised and aligned with the basic standards concer […]
Custom
John Deere | JDM F21
2012
English

Fasteners, Hydraulic Connectors, Hose Fittings and Tube Assemblies — Specification for Zinc-Nickel Electroplated Coating Requirements

1.1 JDM F21 specifies the requirements for electroplated zinc nickel coating for fasteners (see note 1) or hydraulic connectors and hose fittings made of steel or of copper alloy. JDM F21 s […]
DIN EN
DIN EN 24014
1992
English

Hexagon head bolts – Product grades A and B (ISO 4014 : 1988) English version of DIN EN 24014

This International Standard gives specifications for hexagon head bolts with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to […]
DIN
DIN 6901
1990
English

Tapping screw and washer assemblies

This standard specifies requirements for screw and washer assemblies consisting of a tapping screw with f!at bearing face and a DIN 6903 captive washer
NF
NF E 25-511
1984
French

RONDELLES CONIQUES STRIÉES DE SERRAGE Symbole CS

La présente norme fixe les caractéristiques des rondelles coniques striées de serrage en acier au carbone, et définit les essais à effectuer pour leur contrôle. Elles sont généralement ut […]
DIN EN
DIN EN 1662
1998
English

Hexagon bolts with flange – Small series (ISO/DIS 15071 : 1996, modified) English version of DIN EN 1662

This European Standard specifies the characteristics of hexagon flange bolts, small series, with threads from M5 up to and including M16 and with property classes 8.8, 10.9 and A2-70.