DIN 267-2

Fasteners – Technical delivery conditions – Design and dimensional accuracy

English 1984
0.000
DIN
Detailed Information

This standard supplements DIN ISO 4759 Part 1 and applies to those product standards (dimensional standards) in which DIN 267 Part 2 is referred to, e.g. with regard to the surface roughness of bolts, screws and nuts.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 434
2000
English

Square taper steel washers for use with channel sections

This standard specifies dimensions and technical delivery conditions for square taper washers for use in structural bolting of steel channel sections using bolts up to property class 5.6.
JIS
JIS B 0101
1994
English

Screw threads and fasteners — Vocabulary

This Japanese Industrial Standard specifies the terms and definitions related to the "fundamentals of screw thread" and "threaded fasteners (including washers, pins and rivets)" of the screw th [...]
DIN
DIN 6926
1983
English

Prevailing torque type hexagon nuts with flange and with non-metallic insert

This standard gives specifications for prevailing torque type hexagon nuts with flange and with non-metallic insert, with metric thread with diameters from 5 to 20 mm, assigned to product grade [...]
DIN EN
DIN EN 22338
1992
English

Unhardened parallel pins (ISO 2338 : 1986) English version of DIN EN 22 338

This International Standard specifies the characteristics of unhardened parallel pins, with metric dimensions and nominal diameters, d, from 0,6 to 50 mm inclusive.
ISO
ISO 4753
1983
English

Fasteners – Ends of parts with external metric ISO thread

This International Standard lays down the form and dimensions of ends of parts with external metric ISO thread (for example, bolt and screw ends) recommended for use, unless otherwise specified [...]
DIN
DIN 6884
1956
English

Taper Key Torque Transmission – Gib-head Parallel Keys – Dimensions and Application

No figures tor permissible variations of tapers on keys and in hub keyways have so tar been laid down. If, in special cases, certain prescribed permissible variations must be observed, these mu [...]
DIN
DIN 6797
1988
English

Toothed lock washers

The main purpose of toothed lock washers is to permit the flow of electric current between components coated by varnish, anti-corrosive agents or similar materials, the bent ends of the washers [...]
DIN
DIN 934
1987
English

Hexagon nuts with metric coarse and fine pitch thread – Product classes A and B

This standard specifies requirements for M1 to M160 hexagon nuts, assigned to product grade A (up to size M16) or product grade B (for sizes above M16). lf, in special cases, nuts are to comply [...]
DIN
DIN 46241-2
1963
English

Telecommunications Engineering – Contact Rivets – Soldered or Welded – Technical Conditions of Delivery

These conditions of delivery apply to contact rivets according to DIN 46240 Sheet 2 with soldered-on or welded-on tip (at manufacturer's option) in contact materials which are not capable of be [...]