DIN 464

Knurled thumb screws

English 1986

0.000

Detailed Information

The following amendments have been made in comparison with the December 1970 edition of the present standard and the December 1970 edition of DIN 465.
a) DIN 464 and DIN 465 have been combined into one standard.
b) Symbol Sz has been included for the slotted design as specified in DIN 962.
c) The content of the standard has been editorially revised and aligned with the basic standards concerned.
d) The technical delivery conditions have been amended.
e) The previous design m as specified in DIN 267 Part 2, April 1968 edition. has been replaced by product grade F as specified in DIN 267 Part 6 and product grade A as specified in ISO 4759 Part 1.
f) Sizes M 1.7, M 2,3 and M 2,6 have been deleted. However, to cater for documents already in existence and spare parts requirements, they can still be ordered in accordance with the December 1970 editions of DIN 464 and DIN 465.
g) Property class 5.8 has been replaced by the indication of “St = 9 SMnPb 28 K”.

Download File

(Log in to download spec.)

Check out other specifications

DIN

DIN 7980

1972

German

Federringe für Zylindcrschrauhcn

Die Oberfläche der Federringe muß glatt und frei von Zunder und Grat sein. Die Federringe müssen ohne Knicke gewunden und ihre äußeren Kanten scharfkantig bis leicht gerundet sein.

DIN EN

DIN EN 1665

1998

German

Sechskantschrauben mit Flansch – schwere Reihe – Deutsche Fassung EN 1665 : 1997

Diese Europäische Norm legt Eigenschaften für Sechskantschrauben mit Flansch, schwere Reihe, mit Gewinde von M5 bis M20 und mit Festigkeitsklassen 8.8, 10.9 und A2-70 fest.

ASME ANSI

ASME/ANSI B18.18.4M

1987

English

INSPECTION AND QUALITY ASSURANCE FOR FASTENERS FOR HIGHLY SPECIALIZED ENGINEERED APPLICATIONS

This standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans, inspection freq [...]

DIN

DIN 478

1985

English

Square head bolts with collar

This standard specifies product grade A square head bolts with collar and M 5 to M 24 coarse thread. Where, for special purposes, the bolts are to meet requirements differing from those specifi [...]

DIN

DIN 6797

1988

English

Toothed lock washers

The main purpose of toothed lock washers is to permit the flow of electric current between components coated by varnish, anti-corrosive agents or similar materials, the bent ends of the washers [...]

DIN

DIN 7513

1995

English

Hexagon head and slotted head thread cutting screws – Dimensions, requirements and testing

This standard specifies dimensions. requirements and test methods for heat-treated hexagon head and slotted head thread cutting screws with an ISO metric thread as specified in DIN 13-12, with [...]

ASTM

ASTM A354

2007

English

QUENCHED AND TEMPERED ALLOY STEEL BOLTS, STUDS, AND OTHER EXTERNALLY THREADED FASTENERS

This specification covers the chemical and mechanical requirements of quenched and tempered alloy steel bolts, studs, and other externally threaded fasteners 4 in. and under in diameter for app [...]

JIS

JIS B 1126

1995

English

Hexagon washer head tapping screws

This Standard specifies hexagon washer head tapping screws with threads from ST2.2 up to and including ST8.

ASTM

ASTM F436M

2000

English

Standard Specification for Hardened Steel Washers [Metric]

1.1 This specification covers the chemical, mechanical, and dimensional requirements for metric hardened steel washers for use with fasteners having nominal thread diameters M12 through M100. T [...]