DIN 525

Weld studs

English 1986
0.000
DIN
Detailed Information

Weld studs are fasteners which are primarily selected because of their weldability. When determining what loadbearing
capacity weld studs are to have, account shall be taken of their inherent strength, the part into which the studs are welded, and the intended function, e.g. use as components of turnbuckles or similar devices. Weld studs maybe manufactured both with the shank diameter equal to the thread diameter (normal shank) and with the shank diameter approximating the pitch diameter. This does not impair the loadbearing capacity, since the strength values are specified on the basis of maximum loads (in terms of the cross-sectional area of the thread (see also ISO 898 Part 1)).

Download File
(Log in to download spec.)

Check out other specifications

ASME
ASME B18.3
2008
English

SOCKET CAP, SHOULDER, AND SET SCREWS, HEX AND SPLINE KEYS (INCH SERIES)

1.1.1 This Standard covers complete general and dimensional data for various types of hexagon and spline (fluted) socket cap screws, shoulder screws, set screws, and hexagon and spline keys rec [...]
ISO
ISO 888
1976
English

Bolts, screws and studs – Nominal lengths, and thread lengths for general purpose bolts

This International Standard specifies nominal lengths for bolts, screws and studs, and thread lengths for general purpose bolts.
NASM
NASM 35649
2002
English

NUT, PLAIN, HEXAGON, MACHINE SCREW UNC-2B

MATERIAL: STEEL, CARBON, SHALL BE IN ACCORDANCE WITH PROCUREMENT SPECIFICATION. STEEL, CORROSION RESISTANT, SERIES 302 THRU 305 (UNS S30200 THRU UNS S30500), AND TYPES 316 (UNS S31600), 317 (UN [...]
DIN
DIN 925
1986
English

Slotted countersunk head screws with full dog point

The following amendments have been made in comparison with the August 1972 edition. a) Size M1,8 has been deleted because there is no demand for it. b) The previous design m as specified in DIN [...]
DIN
DIN 7168
1991
English

General tolerances for linear and angular dimensions and geometrical tolerances (not to be used tor new designs)

This standard is intended to ensure that all drawings prepared to date In which general tolerances have been specified on the basis of DIN 7168 will remain intelligible and be interpreted corre [...]
DIN EN
DIN EN 28752
1993
English

Slotted spring-type straight pins (ISO 8752: 1987) English version of DIN EN 28 752

This International Standard specifies the characteristics of slotted spring-type straight pins with metric dimensions and nominal diameters, d1, from 1 to 50 mm Inclusive.
DIN
DIN 1441
1974
English

Washers – Type Coarse – for Bolts

Material: St - steel; grade at manufacturer's choice
ASME
ASME B18.3
2012
English

Socket Cap, Shoulder, Set Screws, and Hex Keys (Inch Series)

This Standard covers complete general and dimensional data for various types of hexagon socket cap screws, shoulder screws, set screws, and hexagon keys recognized as an American National Stand [...]
DIN EN
DIN EN 28736
1992
English

Unhardened taper pins with internal thread (ISO 8736 : 1986) English version of DIN EN 28 736

This International Standard specifies the characteristics of unhardened taper pins with internal thread, and metric dimensions and nominal diameters, d1, from 6 to 50 mm inclusive.