DIN 6378

Clip Bolts

English 1974
0.000
DIN
Detailed Information

Clip bolts according to DIN 6378 are clamping components which are used in the manufacture of workpieces. They form part of fixtures which are in immediate contact with workpieces for machining and which must be firmly connected to them.

To tighten the fixture the clamping clips of several clip bolts grip the edges or flanges of the workpiece to be machined. To put the fixture in place or to remove it, the bolts are turned so as to rotate the clamping clips and release the workpiece.

It is recommended that the clip bolt assembly should be provided with a means of limiting rotation as well as a support for the bolts, as shown in the example of application.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 898-1
2009
English

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread

This part of ISO 898 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 […]
ASTM
ASTM F912M
1997
English

Standard Specification for Alloy Steel Socket Set Screws [Metric]

1.1 This specification covers the requirements for quenched and tempered alloy steel socket set screws (SSS) M1.6 through M24 sizes having hardnesses 45 to 53 HRC, ISO 898/5 property class 45H.
ASTM
ASTM F837
2008
English

Standard Specification for Stainless Steel Socket Head Cap Screws

1.1 This specification covers the chemical and mechanical requirements for stainless steel inch socket head cap screw (SHCS) with nominal thread 0.060 through 1.500 in. and intended for use […]
DIN
DIN 6880
1975
English

Bright steel for key bars – Dimensions, limit deviations, mass

This Standard applies to bright key steel in bars of square, rectangular or flat-rectangular cross-section in the nominal dimensions indicated in Tables 1 and 2 and in the steel specified i […]
DIN
DIN 101
1993
English

Rivets – Technical delivery conditions

This standard specifies technical delivery conditions, test methods and acceptance conditions for all types of standardized rivets (except for blind rivets). These specifications are genera […]
ASME ANSI
ASME/ANSI B18.18.4M
1987
English

INSPECTION AND QUALITY ASSURANCE FOR FASTENERS FOR HIGHLY SPECIALIZED ENGINEERED APPLICATIONS

This standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans, inspection […]
DIN
DIN 797
1970
English

Special Foundation Bolts

Strength category (material): 3.6 according to DIN 267 Part 3 Other strength categories or materials by agreement
DIN EN
DIN EN 26157-1
1991
English

Fasteners – Surface discontinuities – Bolts, screws and studs subject to general requirements (ISO 6157-1 : 1988) (English version of DIN EN 26 157 Part 1)

1.1 This part of ISO 6157 establishes limits for various types of surface discontinuities on bolts, screws and studs for general requirements. It applies to bolts, screws and studs with - […]
DIN EN
DIN EN 28734
1992
English

Hardened parallel pins (ISO 8734 : 1987) English version of DIN EN 28 734

This International Standard specifies the characteristics of through hardened and case hardened parallel pins (dowel pins) with metric dimensions and nominal diameters, d, from 1 to 20 mm inclusive.