DIN 6907

Serrated lock washers with external teeth for screw and washer assemblies

English 1990
0.000
DIN
Detailed Information

Serrated lock washers as specified in this standard are intended tor use with screw and washer assemblies as specified in DIN 6900 Part 4. Serrated lock washers are mainly designed to provide electric contact between components coated with varnish, anti-corrosive agents or similar materials, by the tang ends of the washers piercing the coating when such components are Joined.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 7981
1984
English

Cross recessed pan head tapping screws

DIN 6901 shall apply for the designation of tapping screws with captive washer components (tapping screw assemblies). DIN 4000-2-1 tabular layout of article characteristics shall apply for scre [...]
ASTM
ASTM F836M
1997
English

Standard Specification for Style 1 Stainless Steel Metric Nuts

1.1 This specification covers the chemical and mechanical requirements for stainless steel metric nuts with nominal thread diameters M1.6 through M36, and intended for use in engineering applic [...]
DIN
DIN 798
1972
English

Special Foundation Nuts for Special Foundation Bolts according to DIN 797

Strength category or material: 5 according to DIN 267 Sheet 4 Other strength categories or materials by spociel agreement.
DIN EN
DIN EN 28740
1992
English

Full-length parallel grooved pins, with chamfer (ISO 8740 : 1986) English version of DIN EN 28 740

This International Standard specifies the characteristics of full-length parallel grooved pins with chamfer which have three equally spaced grooves impressed longitudinally on their exterior su [...]
SAE
SAE J493
1961
English

Rod Ends and Clevis Pins

The following publications form a part of the specification to the extend specified herein. Unless otherwise indicated the latest revision of SAE publications shall apply. SAE J1010-Emission C [...]
DIN EN
DIN EN 24033
1991
English

Style 2 hexagon nuts – Product grades A and B (ISO 4033 : 1979) English version of DIN EN 24 033

This International Standard gives specifications for hexagon nuts, style 2, with metric dimensions and thread diameters from 5 up to and including 36mm, with product grade A for sizes≤M16 and p [...]
ISO
ISO 887
1983
English

Plain washers for metric bolts, screws and nuts – General plan

This International Standard lays down the specification for the full range of plain washers of product grades A and C for bolts, screws and nuts with thread sizes from M 1 to M 150 inclusive. [...]
DIN ISO
DIN ISO 13715
2000
English

Technical drawings – Edges of undefined shape – Vocabulary and indications

This International Standard defines the terms defining the states of edges and specifies rules for representing states of edges of undefined shape in technical drawings. The proportions and di [...]
DIN EN
DIN EN 10083-2
1991
English

Quenched and tempered steels – Technical delivery conditions for unalloyed quality steels – English version of DIN EN 10083 Part 2

1.1 This European Standard gives the technical delivery requirements for — semi-finished products, hot formed, e.g. blooms, billets, slabs (see notes 2 and 3), — bars (see note 2), — rod, — wid [...]