DIN 6926

Prevailing torque type hexagon nuts with flange and with non-metallic insert

English 1983
0.000
DIN
Detailed Information

This standard gives specifications for prevailing torque type hexagon nuts with flange and with non-metallic insert,
with metric thread with diameters from 5 to 20 mm, assigned to product grade A.

If, in special cases, nuts are to comply with specifications other than those given in this standard, e.g. regarding materials other than those specified in DIN 267 Part 15, resistance to corrosion, high temperature strength over + 120°C, or the like, these shall be the subject of particular agreement at the time of ordering (see also “Field of application” clause in DIN 267 Part 15).

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 1129
2004
English

Tapping screw washer assemblies with plain washers

This Standard specifies the requirements for tapping screw and plain washer assemblies with spaced threads from ST2.2 to ST9.5 inclusive, flat seating heads and mechanical properties in acc […]
ASTM
ASTM A240/A240M
2011
English

Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

1.1 This specification covers chromium, chromium-nickel, and chromium-manganese-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications. 1.2 The val […]
DIN EN
DIN EN 28839
1991
English

Mechanical properties of fasteners – Nonferrous metal bolts, screws, studs and nuts (ISO 8839 : 1986) (English version of DIN EN 28 839)

This International Standard specifies the mechanical properties of bolts, screws, studs and nuts - with nominal thread diameters, d, from M1,6 to M39 inclusive; - with metric ISO thread in […]
ISO
ISO 2936
2001
English

Assembly tools for screws and nuts — Hexagon socket screw keys

This International Standard specifies the dimensions, method of test, designation and marking of hexagon socket screw keys. It also specifies the minimum values of Rockwell hardness that sh […]
DIN
DIN 46241-1
1956
English

Telecommunications Engineering – Contact Rivets – Solid or Clad – Technical Conditions of Delivery

These conditions of delivery apply to solid and clad contact rivets according to DIN 46240 Sheet 1 made of contact materials which can be shaped by nonoutting methods, e.g. silver , and con […]
DIN
DIN 101
1993
English

Rivets – Technical delivery conditions

This standard specifies technical delivery conditions, test methods and acceptance conditions for all types of standardized rivets (except for blind rivets). These specifications are genera […]
DIN
DIN 940
1995
English

Studs – with a length of engagement equal to about 2,5 d

This standard specifies dimensions and technical delivery conditions for studs intended for use mainly in light metals of low strength. As specified in DIN 267-2, the stud end thread shall […]
ASTM
Abstract of ASTM A574
2000
English

ALLOY STEEL SOCKET HEAD CAP SCREWS

1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket head cap screws, 0.060 through 4 in. in diameter where high strength is required. NOTE 1 […]
ISO
ISO 1580
1983
English

Slotted pan head screws – Product grade A

This International Standard specifies the characteristics of slotted pan head screws in product grade A and with thread sizes M 1.6 to M 10 inclusive.