DIN 7

Parallel pins

English 1981

0.000

Detailed Information

Parallel pins in accordance with this 5tandard are designed for the fastening of two or more individual elements. A friction type connection can be achieved by the selection of suitable fits If such a connection is meant to be disconnected repeatedly, then it becomes preferable to use taper pins in accordance with DIN 1.

Download File

(Log in to download spec.)

Check out other specifications

DIN

DIN 925

1986

English

Slotted countersunk head screws with full dog point

The following amendments have been made in comparison with the August 1972 edition. a) Size M1,8 has been deleted because there is no demand for it. b) The previous design m as specified in DIN 267 Part 2, April1968 edition, has been replaced by product grade F as specified in DIN 267 Par […]

JIS

JIS B 0101

1994

English

Screw threads and fasteners — Vocabulary

This Japanese Industrial Standard specifies the terms and definitions related to the "fundamentals of screw thread" and "threaded fasteners (including washers, pins and rivets)" of the screw threads to be used generally.

ISO

ISO 2903

1977

English

ISO metric trapezoidal screw threads – Tolerances

This International Standard specifies a tolerance system for metric trapezoidal screw threads according to ISO 2902. The tolerances refer to the basic profile according to ISO 2901. The tolerance system does not apply to trapezoidal screw threads with special requirements on axial displa […]

DIN

DIN 440

1990

English

Washers for use in timber constructions

This standard specifies requirements for product grade C washers with a larger outside diameter. Such washers may be provided with a round hole (type R) for M5 to M52 bolts or a square hole (type V) for M5 to M22 bolts. The preferred application of these washers is in bolt/nut assemblies […]

DIN

DIN 529

1986

English

Masonry and foundation bolts

This standard specifies the characteristics of M 8 to M 72 X 6 masonry and foundation bolts. They are designed for use in masonry, concrete foundations and the like. The shape of the shank is optional; compliance is only required in the case of the maximum dimensions specified (space requ […]

SAE

SAE AS8879

2001

English

Screw Threads – UNJ Profile, Inch

This SAE Aerospace Standard (AS) specifies the characteristics of the UNJ profile inch series of screw threads, to include a mandatory controlled radius of 0.18142P to 0.15011P at the root of the external thread and with a minor diameter of both external and internal threads increased to […]

3.01