DIN 7331

Compression rivets

English 1993
0.000
DIN
Detailed Information

This standard specifies dimensions of, and technical delivery conditions for, steel and nonferrous metal compression rivets. Such rivets consist of two tubular parts, one of which is provided with a bore (rivet head) to receive the other (rivet body). In order to ensure proper assembly, body and head shall originate from the same manufacturer.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 3269
2000
English

Fasteners — Acceptance inspection

1.1 This International Standard specifies the acceptance inspection procedure that the purchaser of fasteners must follow in order to determine whether a lot of fasteners will be accepted or re [...]
DIN
DIN 1469
1978
English

Grooved Pins, Half Length Grooved with Gorge

Grooved pins according to this Standard are positive or non-positive connecting elements. They are used for holding retaining rings, retaining washers, springs, etc., the grooved pin being seat [...]
ASTM
Abstract of ASTM A307
2000
English

CARBON STEEL EXTERNALLY THREADED STANDARD FASTENERS

1.1 This specification covers the chemical and mechanical requirements of three grades of carbon steel bolts and studs, in sizes 1/4 in. through 4 in. The fasteners are designated by "Grade" de [...]
ASTM
ASTM C954
2010
English

STEEL DRILL SCREWS FOR THE APPLICATION OF GYPSUM PANEL PRODUCTS OR METAL PLASTER BASES TO STEEL STUDS FROM 0.033 IN. (0.84 mm) TO 0.112 IN. (2.84 mm) IN THICKNESS

1.1 This specification covers minimum requirements for steel drill screws for use in fastening gypsum panel products or metal plaster bases to steel members from 0.033 in. (0.84 mm) to 0.112 in [...]
Others
NF E 25-511
1984
French

RONDELLES CONIQUES STRIÉES DE SERRAGE Symbole CS

La présente norme fixe les caractéristiques des rondelles coniques striées de serrage en acier au carbone, et définit les essais à effectuer pour leur contrôle. Elles sont généralement utilis [...]
ASTM
ASTM F912
2004
English

ALLOY STEEL SOCKET SET SCREWS

1.1 This specification covers the requirements for quenched and tempered alloy steel socket-set screws (SSS) 0.060 through 2.000-in. sizes having hardnesses 45 to 53 HRC. 1.2 These set screws [...]
ISO
ISO 885
1976
English

General purpose bolts and screws – Metric series – Radii under the head

This International Standard specifies the sizes of the radii under the head of metric series general purpose bolts and screws.
ISO
ISO 7416
1984
English

Plain washers, chamfered, hardened and tempered for high-strength structural bolting

This International Standard specifies those hardened and tempered circular washers intended for assembIy with large series hexagon high-strength Structural bolts and nuts of diameters from M12 [...]
DIN
DIN 936
1976
English

Hexagon Thin Nuts (Old Type)

Hexagon nuts according to this Standard are still specified for a period not as yet determined for replacement needs and for existing designs only. For new designs, hexagon nuts according to D [...]