DIN 7983

Cross recessed raised countersunk head tapping screws

English 1990
0.000
DIN
Detailed Information

DIN 7504 shall apply with regard to tapping screws with drilling tip (self-drilling screws).
The DIN 4000 – 2 – 1 tabular layout of article characteristics shall apply for screws as covered in this standard.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 562
2000
English

Square thin nuts Product grade B

This standard specifies dimensions and technical delivery conditions for sizes M1,6 to M10 square thin nuts of product grade B.
DIN
DIN 914
1980
English

Hexagon socket set screws with cone point – ISO 4027 modified

ISO 4027 specifies product grade A hexagon socket set screws with cone points with metric dimension and thread diameters from 1,6 up to and including 24 mm.
ASME
Abstract ASME B1.15
1995
English

UNIFIED INCH SCREW THREADS (UNJ THREAD FORM)

This standard establishes the basic triangular profile for the UNJ thread form, provides a system of designations, lists the standard series of diameter-pitch combinations for diameters from 0.600 to 6.000 in., and specifies limiting dimensions and tolerances. It specifies the characteri […]
DIN
DIN 547
1986
English

Round nuts with drilled holes in one face

Round nuts with drilled holes in one face are parts generally made of steel, stainless steel or non-ferrous metals, which are designed to be used for various purposes, as for instance in electrical engineering. They can be tightened by means of a pin type face wrench as specified m DIN 31 […]
JIS
JIS B 1084
1990
English

Method of tightening test for threaded fasteners

This Japanese Industrial Standard specifies the method of test for obtaining characteristic value for tightening (hereafter referred to as "tightening characteristic value") by combination of bolts and nuts. In this Standard tightening characteristic values to be objective are torque coef […]
NASM
NASM 24671
1998
English

SCREW, CAP, SOCKET HEAD, FLAT COUNTERSUNK, 82°, CORROSION-RESISTING STEEL, UNC-3A

MATERIAL: STEEL CORROSION-RESISTING, IN ACCORDANCE WITH FED. STD No 66; AISI 302. 303. 304, 305. 316 OR 384 (DEVELOPED FOR COLD HEADING). MINIMUM ULTIMATE TENSILE STRENGTH SHALL BE 80.000 PSI FOR SIZES THRU 0.625 AND 70.000 PSI FOR SIZES OVER 0.625.