DIN 7999

High strength hexagon fit bolts with large widths across flats for structural steel bolting

English 1983
0.000
DIN
Detailed Information

This standard specifies high strength hexagon fit bolts with large widths across flats. Fit bolts are intended for use in structural steel bolting (GVP bolting or SLP bolting). They may only be used together with hexagon nuts complying with DIN 6915 and with washers complying with DIN 6916, DIN 6917 or DIN 6918.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 557
1994
English

Product grade C square nuts

This standard specifies requirements for M 10 to M 12 square nuts assigned to product grade C. See DIN 962 (or the standards referred to therein) for special nut types or finishes. If, in s […]
DIN EN
DIN EN 28743
1992
English

Half-length centre grooved pins (ISO 8743 : 1986) English version of DIN EN 28 743

This International Standard specifies the characteristics of half-length centre grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with […]
JIS
JIS B 0206
1973
English

Unified coarse screw threads

This Japanese Industrial Standard specifies the basic profile, and the formal and basic size of unified coarse screw threads used for aircrafts and otherwise only when especially required. […]
DIN
DIN 662
1993
English

Oval-head rivets with nominal diameters from 1,6 to 6 mm

This standard specifies dimensions of steel and nonferrous metal oval-head rivets with nominal diameters from 1,6 to 6 mm.
ISO
ISO 2342
1972
English

Slotted headless screws – Metric series

This International Standard specifies the dimensions of slotted headless screws of the metric series.
ISO
ISO 1482
1983
English

Slotted countersunk (flat) head tapping screws (common head style)

This International Standard specifies the characteristics of slotted countersunk (flat) head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.
ASTM
ASTM A434
2004
English

Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered

1.1 This specification covers hot-wrought and cold-finished quenched and tempered alloy steel bars. 1.2 Hot-wrought bars are available in three strength level classes designated BB, BC, and […]
ISO
ISO 7045
2011
English

Pan head screws with type H or type Z cross recess — Product grade A

This International Standard specifies the characteristics of pan head screws of product grade A, with threads from M1,6 to M10 inclusive, and with type H or type Z cross recess. If, in spe […]
ANSI
ANSI B18.2.3.6M
1995
English

METRIC HEAVY HEX BOLTS

1.1 This standard covers the complete general and dimensional data for metric heavy hex bolts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standar […]