DIN 80705

Thin nuts with coarse pitch and fine pitch thread and with small widths across flats

English 1990
0.000
DIN
Detailed Information

This standard specifies requirements for thin nuts with small widths across flats and ISO metric screw thread as specified in the DIN 13 series, assigned to product grades B and C. If, in special cases, nuts are to comply with specifications other than those given in this standard (e.g. regarding property class or material), these shall be selected in accordance with the relevant standards.

Download File
(Log in to download spec.)

Check out other specifications

ASTM
Abstract of ASTM A490M
1993
English

HIGH-STRENGTH STEEL BOLTS, CLASSES 10.9 AND 10.9.3, FOR STRUCTURAL STEEL JOINTS [METRIC]

1.1 This specification covers the chemical and mechanical requirements of quenched and tempered steel bolts, in nominal thread diameters M16 to M36, inclusive. These bolts are intended for […]
ISO
ISO 7089
1983
English

Plain washers – Normal series – Product grade A

This International Standard lays down the specification for plain washers of product grade A, preferable for hexagon bolts, screws and nuts of product grades A and B with normal width acros […]
BS EN
BS EN 10025-3
2004
English

Hot rolled products of structural steels — Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels

Part 3 of this document, in addition to part 1, specifies requirements for flat and long products of hot rolled weldable fine grain structural steels in the normalized/normalized rolled del […]
DIN
DIN 960
1970
German

Sechskantschrauben – Metrisches Feingewinde – Ausführung m und mg

Eingeklammerte Größen sind möglichst zu vermeiden. Üblicherweise werden diese Schrauben in den durch Gewichtsangabe gekennzeichneten Größen hergestellt. Technische Lieferbedingungen noch DIN 267
BS EN
BS EN 14399-2
2015
English

High-strength structural bolting assemblies for preloading Part 2: Suitability for preloading

This European Standard specifies the technical requirements for high-strength structural bolting assemblies in order to ensure the suitability for preloading of bolted connections in metall […]
DIN
DIN 7339
1993
English

One-piece tubular rivets drawn from strip

This standard specifies dimensions of, and technical delivery conditions for, steel and nonferrous metal one-piece tubular rivets drawn from strip.
DIN
DIN 929
1987
English

Hexagon weld nuts

This standard specifies requirements for M 3 to M 16 hexagon weld nuts assigned to product grade A.
DIN
DIN 2095
1973
English

Helical Springs Made of Round Wire – Quality Specifications for Cold Coiled Compression Springs

This Standard applies to helical compression springs made of spring-hard round wire which, after cold coiling, are subjected only to tempering to relieve residual stresses. Cold coiled comp […]
DIN EN
DIN EN 10083-2
1991
English

Quenched and tempered steels – Technical delivery conditions for unalloyed quality steels – English version of DIN EN 10083 Part 2

1.1 This European Standard gives the technical delivery requirements for — semi-finished products, hot formed, e.g. blooms, billets, slabs (see notes 2 and 3), — bars (see note 2), — rod, — […]