DIN 910

Heavy-duty hexagon head screw plugs

English 1992
0.000
DIN
Detailed Information

This standard specifies dimensions and technical delivery conditions for screw plugs which are intended to be screwed into holes with parallel thread as specified in DIN 13 Part 5, 6 or 7, or ISO 228-1. Such plugs may be used together with seal rings as specified in DIN 7603, type and material of which are to be selected as a function of the operating conditions (e.g. pressure, temperature, fluid with which the threaded parts are in contact, etc.).

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 888
1976
English

Bolts, screws and studs – Nominal lengths, and thread lengths for general purpose bolts

This International Standard specifies nominal lengths for bolts, screws and studs, and thread lengths for general purpose bolts.
JIS
JIS B 1004
1975
English

Hole sizes before threading

This Japanese Industrial Standard specifies the diameters of holes to be drilled before threading the following screw threads or before carrying on similar works, hereinafter referred to as the [...]
ISO
ISO 1302
2002
English

Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation

This International Standard specifies the rules for the indication of surface texture in technical product documentation (e.g. drawings, specifications, contracts, reports) by means of graphica [...]
DIN
DIN 6884
1956
English

Taper Key Torque Transmission – Gib-head Parallel Keys – Dimensions and Application

No figures tor permissible variations of tapers on keys and in hub keyways have so tar been laid down. If, in special cases, certain prescribed permissible variations must be observed, these mu [...]
DIN
DIN 7990
1999
English

Steel hexagon head bolts for structural steel bolting, for supply with hexagon nuts

This standard specifies dimensions and technical delivery conditions for M12 to M30 steel hexagon head bolts of product grade C for use in structural steel bolting. It also specifies the nuts a [...]
DIN EN
DIN EN 24032
1992
English

Hexagon nuts, style 1 – Product grades A and B (ISO 4032 :1986) English version of DIN EN 24032

This International Standard gives specifications for hexagon nuts, style 1, with thread diameters from M1,6 to M64 inclusive, with product grade A for sizes d < M16 and product grade B for size [...]
ASTM
ASTM F836M
1997
English

Standard Specification for Style 1 Stainless Steel Metric Nuts

1.1 This specification covers the chemical and mechanical requirements for stainless steel metric nuts with nominal thread diameters M1.6 through M36, and intended for use in engineering applic [...]
DIN
DIN 95
1986
English

Slotted raised countersunk (oval) head wood screws

The following amendments have been made in comparison with the March 1975 edition. a) Nominal lengths 90 mm and 100 mm have been deleted in order to bring this standard into line with the other [...]
DIN
DIN 435
1989
English

Square taper washers for use with I sections

Washers as specified In this standard are intended for use in structural bolting of I sections using bolts up to property class 5.6.