DIN 912

Hexagon socket head cap screws (modified version of ISO 4762)

English 1983
0.000
DIN
Detailed Information

This standard specifies product grade A hexagon socket head cap screws with metric screw threads and thread diameters from 1,4 to 100 mm. If, in exceptional cases, the screws are to meet requirements other than those given in this standard, these shall be selected in accordance with the appropriate standards.

Download File
(Log in to download spec.)

Check out other specifications

ASTM
ASTM F835
2004
English

ALLOY STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS

1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket button (SBHCS) 0.060 through 0.625 thread sizes and flat countersunk (SFHCS) 0.060 through 1. [...]
JIS
JIS B 1124
2003
English

Drilling screws with tapping screw thread

This Standard is the Japanese Industrial Standard prepared based on first editions of ISO 15480 Hexagon washer head drilling screws with tapping screw thread, ISO 15481 Cross recessed pan head [...]
ASME
ASME B18.2.8
1999
English

CLEARANCE HOLES FOR BOLTS, SCREWS, AND STUDS

This standard covers the recommended clearance hole sizes for #0 through 1.5 inch fasteners in three classes of clearance using a close-, normal-, and loose-fit category.
DIN
DIN 6900-3
1990
English

Screw and washer assemblies – Coarse threaded screws with captive curved spring lock washer

This standard specifies requirements for screw and washer assemblies consisting of an M2,5 to M12 screw with flat bearing face, assigned to a property class below 8.8, and a captive curved spri [...]
JIS
JIS B 1083
1990
English

General rules for tightening of threaded fasteners

This Japanese Industrial Standard specifies general matters relating to significance of tightening by combination of bolt and nut, basis of tightening and representative control method. Furthe [...]
ASTM
Abstract of ASTM A563
2000
English

CARBON AND ALLOY STEEL NUTS

This specification covers chemical and mechanical requirements for eight grades of carbon and alloy steel nuts for general structural and mechanical uses on bolts. studs. and other externally t [...]
ASTM
Abstract of ASTM F901
2001
English

ALUMINUM TRANSMISSION TOWER BOLTS AND NUTS

1.1 This specification covers aluminum structural bolts and nuts for use in the construction of aluminum transmission towers, substations, and similar aluminum structures. 1.2 Diameters of bolt [...]
ASME
ASME B18.1.1
2006
English

SMALL SOLID RIVETS 7/16 IN. NOMINAL DIAMETER AND SMALLER

This standard covers complete general and dimensional data for those types of small solid rivets recognized as “American National Standard." All other types of small solid rivets, within the li [...]
DIN
DIN 918 Supplement 3
1995
English

Synopsis of European Standards for fasteners

This Supplement reflects the most recent state of European standardization for fasteners by including: a) a list of DIN EN Standards classified by subject, and the correlated DIN Standards and [...]