DIN 922

Slotted pan head screws with small head and full dog point

English 1986
0.000
DIN
Detailed Information

The following amendments have been made in comparison with the August 1972 edition.
a) Size M1.8 has been deleted because there is no demand for it.
b) The previous design m as specified in DIN 267 Part 2, April 1968 edition, has been replaced by product grade F as specified in DIN 267 Part 6 and product grade A as specified in ISO 4759 Part 1.
c) Limiting dimensions calculated from the permissible tolerances have been included.
d) Lengths l1=1mm and 1,2mm have been deleted since they have proved impracticable.
e) The technical delivery conditions have been amended.
f) The content of the standard has been editorially revised.
g) The example of designation has been amended.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 7980
1972
German

Federringe für Zylindcrschrauhcn

Die Oberfläche der Federringe muß glatt und frei von Zunder und Grat sein. Die Federringe müssen ohne Knicke gewunden und ihre äußeren Kanten scharfkantig bis leicht gerundet sein.
DIN EN
DIN EN 1665
1998
German

Sechskantschrauben mit Flansch – schwere Reihe – Deutsche Fassung EN 1665 : 1997

Diese Europäische Norm legt Eigenschaften für Sechskantschrauben mit Flansch, schwere Reihe, mit Gewinde von M5 bis M20 und mit Festigkeitsklassen 8.8, 10.9 und A2-70 fest.
ASME ANSI
ASME/ANSI B18.18.4M
1987
English

INSPECTION AND QUALITY ASSURANCE FOR FASTENERS FOR HIGHLY SPECIALIZED ENGINEERED APPLICATIONS

This standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans, inspection freq [...]
DIN
DIN 478
1985
English

Square head bolts with collar

This standard specifies product grade A square head bolts with collar and M 5 to M 24 coarse thread. Where, for special purposes, the bolts are to meet requirements differing from those specifi [...]
DIN
DIN 6797
1988
English

Toothed lock washers

The main purpose of toothed lock washers is to permit the flow of electric current between components coated by varnish, anti-corrosive agents or similar materials, the bent ends of the washers [...]
DIN
DIN 7513
1995
English

Hexagon head and slotted head thread cutting screws – Dimensions, requirements and testing

This standard specifies dimensions. requirements and test methods for heat-treated hexagon head and slotted head thread cutting screws with an ISO metric thread as specified in DIN 13-12, with [...]
ASTM
ASTM A354
2007
English

QUENCHED AND TEMPERED ALLOY STEEL BOLTS, STUDS, AND OTHER EXTERNALLY THREADED FASTENERS

This specification covers the chemical and mechanical requirements of quenched and tempered alloy steel bolts, studs, and other externally threaded fasteners 4 in. and under in diameter for app [...]
JIS
JIS B 1126
1995
English

Hexagon washer head tapping screws

This Standard specifies hexagon washer head tapping screws with threads from ST2.2 up to and including ST8.
ASTM
ASTM F436M
2000
English

Standard Specification for Hardened Steel Washers [Metric]

1.1 This specification covers the chemical, mechanical, and dimensional requirements for metric hardened steel washers for use with fasteners having nominal thread diameters M12 through M100. T [...]