DIN EN 10269

Steel and nickel alloys for fasteners with specified elevated and/or low temperature properties – English version of DIN EN 10269

English 1999
0.000
DIN EN
Detailed Information

This European Standard specifies requirements for semi-finished products, bars and rods for fasteners with properties specified at elevated and/or low temperature made of non-alloy and alloy (including stainless) steels and nickel alloys as given in table 1.

The general technical delivery conditions in EN 10021 also apply to products supplied in accordance with this European Standard.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 0208
1978
English

Unified fine screw threads

This Japanese Industrial Standard specifies the basic profile, formulas and basic dimensions for unified fine screw threads used for aircrafts and other purposes of limited necessity.
DIN
DIN 926
1986
English

Slotted set screws with full dog point

The following amendments have been made in comparison with the August 1972 edition. a) Size M1,8 has been deleted because there is no demand for it. b) The previous design m as specified in […]
ASTM
Abstract of ASTM F788/F788M
2002
English

SURFACE DISCONTINUITIES OF BOLTS, SCREWS, AND STUDS

This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of bolts, screws, and studs. including […]
DIN
DIN 558
1967
English

Hexagon Screws – Thread Approximately to Head – Metric Thread Type g

These screws are normally made in the sizes for which weight data are indicated. Sizes for which the weight data are emphasized by bold type are generally stocked commercially because they […]
JIS
JIS B 0271
2004
English

Three wires for screw thread measuring and four wires for screw thread measuring

This Japanese Industrial Standard specifies three wires and four wire for screw thread measuring (hereafter referred to as “wires”) which consist of a set of three and four wires respective […]
JIS
JIS B 0209-3
2001
English

ISO general purpose metric screw threads – Tolerances – Part 3: Deviations for constructional screw threads

This Standard specifies deviations for pitch and crest diameters for ISO general purpose metric screw threads (M) conforming to JIS B 0205-2 having basic profile according to JIS B 0205-1. […]
DIN
DIN 7964
1990
English

Reduced shank bolts and screws with coarse thread

This standard specifies requirements for M 2,5 to M 30 bolts and screws ('bolts', for short) with various head styles and a diameter of the unthreaded portion of the shank smaller than the […]
SAE
SAE J78
1998
English

Steel Self-Drilling Tapping Screws

1.1 General—This SAE Standard covers the dimensional and general specifications, including performance requirements, for carbon steel self-drilling tapping screws suitable for use in genera […]
JIS
JIS B 1101
1996
English

Slotted head screws

This Japanese Industrial Standard specifies the steel slotted head screws (hereafter, referred to as “steel screws") , stainless steel slotted head screws (hereafter referred to as “stainle […]