DIN EN 28735

Hardened parallel pins with internal thread (ISO 8735 : 1987) English version of DIN EN 28 735

English 1992
0.000
DIN EN
Detailed Information

This International Standard specifies the characteristics of through hardened and case hardened parallel pins with internal thread, metric dimensions and nominal diameters, d1, from 6 to 50 mm inclusive.

Download File
(Log in to download spec.)

Check out other specifications

ASTM
ASTM F2329
2005
English

ZINC COATING, HOT-DIP, REQUIREMENTS FOR APPLICATION TO CARBON AND ALLOY STEEL BOLTS, SCREWS, WASHERS, NUTS AND SPECIAL THREADED FASTENERS

1.1 This specification covers the requirements for hot-dip zinc coating applied to carbon steel and alloy steel bolts, screws, washers, nuts, and special threaded fasteners applied by the hot-d [...]
JIS
JIS B 0203
1999
English

Taper pipe threads

This Standard specifies taper pipe threads and is applicable to the threads used mainly for pressure-tight joints on the threads for jointing the pipes, pipe fittings, fluid machinery, etc. Th [...]
DIN
DIN 7968
1999
English

Steel hexagon fit bolts for structural steel bolting, for supply with hexagon nuts

This standard specifies dimensions and technical delivery conditions for M12 to M30 steel hexagon fit bolts of product grade C for use in structural steel bolting. It also specifies the nuts an [...]
JIS
JIS B 0002-2
1998
English

Technical drawings — Screw threads and threaded parts — Part 2 : Screw thread inserts

This part of JIS B 0002 specifies methods for the representation of screw thread inserts on technical drawings.
ASTM
Abstract of ASTM A574M
1997
English

ALLOY STEEL SOCKET HEAD CAP SCREWS [METRIC)

1.1 This specification covers the requirements for quenched and tempered alloy steel socket head cap screws 1.6 mm through 48 mm in diameter having a minimum ultimate tensile strength of 1220 MPa.
JIS
JIS B 1052
1998
English

Mechanical properties of steel nuts

This Japanese Industrial Standard specifies mechanical properties of steel nuts.
ASME
ABSTRACT OF ASME B1.2
2007
English

GAGES AND GAGING FOR UNIFIED INCH SCREW THREADS

This standard provides essential specifications and dimensions for the gages used on Unified inch screw threads (UN and UNR thread form), and covers the specifications and dimensions for the th [...]
DIN EN
DIN EN 26157-3
1991
English

Fasteners – Surface discontinuities – Bolts, screws and studs subject to special requirements (ISO 6157 -3 : 1988) (English version of DIN EN 26 157 Part 3)

This part of ISO 6157 establishes limits for various types of surface discontinuities on bolts, screws and studs for special requirements. It applies to bolts. screws and studs with - nominal [...]
ASME
ASME B18.2.6
2011
English

FASTENERS FOR USE IN STRUCTURAL APPLICATIONS

1.1.1 This Standard covers the complete general and dimensional data for five products in the inch series recognized as an American National Standard. These five structural products include: a. [...]