DIN EN 28736

Unhardened taper pins with internal thread (ISO 8736 : 1986) English version of DIN EN 28 736

English 1992
0.000
DIN EN
Detailed Information

This International Standard specifies the characteristics of unhardened taper pins with internal thread, and metric dimensions and nominal diameters, d1, from 6 to 50 mm inclusive.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 2342
1972
English

Slotted headless screws – Metric series

This International Standard specifies the dimensions of slotted headless screws of the metric series.
ISO
ISO 2902
1977
English

ISO metric trapezoidal screw threads – General plan

This International Standard specifies a series of diameter and pitch combinations for ISO metric trapezoidal screw threads having the basic profile according to ISO 2901.
ASTM
Abstract of ASTM F837M
1991
English

STAINLESS STEEL SOCKET HEAD CAP SCREWS [METRIC]

1.1 This specification covers the chemical and mechanical requirements for stainless steel metric socket head cap screws (SHCS) with nominal thread M1.6 through M36 and intended for use in appl [...]
JIS
JIS B 1083
1990
English

General rules for tightening of threaded fasteners

This Japanese Industrial Standard specifies general matters relating to significance of tightening by combination of bolt and nut, basis of tightening and representative control method. Furthe [...]
JIS
JIS B 0206
1973
English

Unified coarse screw threads

This Japanese Industrial Standard specifies the basic profile, and the formal and basic size of unified coarse screw threads used for aircrafts and otherwise only when especially required. Ref [...]
JIS
JIS B 0203
1999
English

Taper pipe threads

This Standard specifies taper pipe threads and is applicable to the threads used mainly for pressure-tight joints on the threads for jointing the pipes, pipe fittings, fluid machinery, etc. Th [...]
NASM
NASM 3213
1998
English

SCREWS, MACHINE, PAN HEAD, CROSS-RECESSED, SELF-SEALING, INTEGRAL FLUOROSILICONE O-RING, PLAIN AND SELF-LOCKING

(a) SCREW: CORROSION-RESISTING STEEL (CRES) IN ACCORDANCE WITH MIL-S-82496. (b) 0-RING: FLUOROSILICONE RUBBER, COMPOSITION B IN ACCORDANCE WITH MIL-S-82496 (RESISTANT TO MIL-H-5606 HYDRAULIC FL [...]
ISO
ISO 2010
2011
English

Slotted raised countersunk head screws — Product grade A

This International Standard specifies the characteristics of countersunk slotted raised head screws of product grade A and with threads from M1,6 to M10 inclusive. If, in special cases, specif [...]
ASME
ASME B18.2.3.9M
1999
English

METRIC HEAVY HEX FLANGE SCREWS

This standard covers the complete dimensional and general data for metric series heavy hex flange screws recognized as American National Standard.