DIN EN 28746

Grooved pins with round head (ISO 8746 : 1986) English version of DIN EN 28 746

English 1992
0.000
DIN EN
Detailed Information

This International Standard specifies the characteristics of round head grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with metric dimensions and nominal diameter, d1, from 1,4 to 20 mm inclusive.

The displaced material to each side of the grooves forming an expanded diameter d2 which is larger than the nominal diameter d1 will cause a positive locking fit when these grooved pins are forced into a drilled hole equal to the nominal diameter d1 (see clause 4).

Download File
(Log in to download spec.)

Check out other specifications

DIN EN
DIN EN 14399-6
2006
English

High-strength structural bolting assemblies for preloading – Part 6: Plain chamfered washers (includes Corrigendum AC:2006) English version of DIN EN 14399-6:2006-06

This document specifies, together with EN 14399-1, hardened and tempered plain washers with chamfer intended for assembly with large series hexagon high-strength structural bolts and nuts with [...]
DIN
DIN 6886
1967
English

Stressed-type Fastenings with Taper Action – Taper Keys – Keyways – Dimensions and Application

For the time being no permissible variations have been laid down for the taper on the key and in the hub keyway. If special conditions make necessary the observance of certain permissible varia [...]
DIN
DIN 6908
1995
English

Conical spring washers for screw and washer assemblies

This standard specifies dimensions and technical delivery conditions for conical spring washers which are intended for use with screw and washer assemblies as specified in DIN 6900-5. They are [...]
ASTM
ASTM A449
2010
English

HEX CAP SCREWS, BOLTS, AND STUDS, STEEL, HEAT TREATED, 120/105/90 KSI MINIMUM TENSILE STRENGTH, GENERAL USE

1.1 This specification covers quenched and tempered steel hex cap screws, bolts, and studs having a minimum tensile strength of 120 ksi for diameters 1.0 in. and smaller; 105 ksi for diameters [...]
BS EN
BS EN 14399-2
2015
English

High-strength structural bolting assemblies for preloading Part 2: Suitability for preloading

This European Standard specifies the technical requirements for high-strength structural bolting assemblies in order to ensure the suitability for preloading of bolted connections in metallic s [...]
ISO
ISO 10683
2014
English

Fasteners — Non-electrolytically applied zinc flake coatings

This International Standard specifies requirements for non-electrolytically applied zinc flake coatings for steel fasteners. It applies to coatings: — with or without hexavalent chromium; — wit [...]
JIS
JIS B 1112
1995
English

Cross-recessed head wood screws

This Japanese Industrial Standard specifies the cross-recessed head wood screws (Hereafter, referred to as "wood screws".) made of steel wire, stainless steel and brass for general use.
ASTM
Abstract of ASTM F912M
1997
English

ALLOY STEEL SOCKET SET SCREWS [METRIC]

1.1 This specification covers the requirements for quenched and tempered alloy steel socket set screws (SSS) M 1.6 through M24 sizes having hardnesses 45 to 53 HRC, ISO 898/5 Property Class 45H.
IFI
IFI-560
2007
English

TEST PROCEDURE FOR THE PERFORMANCE OF NUTS WITH PRE-APPLIED ADHESIVE COATED THREADS- METRIC SERIES

This standard establishes a conformance test procedure for the performance of pre-applied adhesive coatings applied to metric series nuts, in nominal sizes M5 thru M20 intended for application [...]