DIN EN 28765

Hexagon head bolts with metric fine pitch thread – Product grades A and B (ISO 8765 : 1988) English version of DIN EN 28 765

English 1992
0.000
DIN EN
Detailed Information

This International Standard gives specifications for hexagon head bolts with metric fine pitch thread with nominal thread diameters d from 8 to 64 mm of product grade A for nominal thread diameters d from 8 to 24 mm and nominal lengths, l, up to and including 10d or 150 mm, whichever is shorter, and of product grade B for nominal thread diameters d over 24 mm or nominal lengths over 10 d or 150 mm, whichever is shorter.

Download File
(Log in to download spec.)

Check out other specifications

IFI
IFI-119
2008
English

STRUCTURAL FLUSH BREAK PULL MANDREL SELF-PLUGGING BLIND RIVETS

This standard establishes the dimensional, mechanical, and performance requirements of inch series structural flush break pull mandrel self-plugging blind rivets suitable for use in joining the [...]
ISO
ISO 15071
1999
English

Hexagon bolts with flange — Small series — Product grade A

This International Standard specifies the characteristics of hexagon bolts with flange, small series, with product grade A, with threads from M5 up to and including M16 and property classes 8.8 [...]
IFI
IFI-113
2007
English

STEEL SELF-DRILLING TAPPING SCREWS

1.1 Scope. This inch series standard covers requirements for steel, self-drilling, tapping screws suitable for use in general engineering applications. The objective of this standard is to ens [...]
DIN
DIN 8187
1984
English

European type roller chains

This standard specifies dimensions and technical delivery conditions for European type roller chains which, together with their associated chain wheels, are predominantly used as power transmis [...]
ASTM
Abstract of ASTM F879M
1991
English

STAINLESS STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS [METRIC]

1.1 This specification covers the chemical and mechanical requirements for stainless steel metric hexagon socket button (SBHCS) and flat countersunk (SFHCS) head cap screws with nominal thread [...]
DIN
DIN 267-1
1982
English

Fasteners – Technical delivery conditions – General requirements

This standard applies to standardized fasteners (mainly bolts, screws, nuts and similar threaded and formed parts) as finished components in the condition on delivery, in so far as no special s [...]
DIN
DIN 68163
1982
English

Nails for assembling timber pallets

This standard specifies requirements for nails used in the assembly of timber pallets.
DIN
DIN 946
1991
English

Determination of coefficient of friction of bolt/nut assemblies under specified conditions

This standard specifies a tightening test for determining the coefficient of friction of bolt/nut assemblies under specified conditions. It is only applicable for comparison purposes, such as a [...]
JIS
JIS B 1117
1995
English

Slotted set screws

This Japanese Industrial Standard specifies the steel made slotted set screws (hereafter, referred to as "steel set screws"), and stainless steel made set screws (hereafter, referred to as "sta [...]