General Motors | GM6174M

Corrosion Protective Coatings Phosphate/Organic/Oil Type

English 2001
0.000
Custom
Detailed Information

This specification covers basic requirements for a black corrosion protective coating which is produced in a process consisting of zinc phosphate treatment, chromic acid rinse or seal, organic coating, oven bake, water and oil emulsion
post treatment and air dry.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 267-10
1988
German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Feuerverzinkte Teile

Diese Technischen Lieferbedingungen gelten für mechanische Verbindungselemente {im wesentlichen Schrauben und Muttern) mit Regelgewinde M 6 bis M 36 und mit Zinküberzügen durch Feuerverzinken s [...]
DIN
DIN 6905
1990
English

Spring lock washers for screw and washer assemblies

Spring lock washers as specified in this standard are intended for use with screw and washer assemblies as specified in DIN 6900 Part 3. They are designed for use with bolted connections with b [...]
JIS
JIS B 0123
1999
English

Designation system for screw threads

This Japanese Industrial Standard specifies designation for screw threads used in the Standards referring the principle of screw thread and the Standards referring the products having screw thread.
DIN
DIN 1544
1975
English

Plat Steel Products – Cold Rolled Steel Strip – Dimensions, Permissible Variations on Dimensions and Form

1.1. This Standard applies to cold rolled flat products ≥ 0.10 ≤ 6 mm thick without surface coatings, and in particular to cold rolled strip in rolling widths ≤ 650 mm and bars cut from such st [...]
IFI
IFI-534
1999
English

METRIC BEVELED WASHERS

This standard covers metric steel beveled washers, in nominal sizes 12 thru 36 mm, intended for use with American Standard beams and channels in structural applications to compensate for the la [...]
ISO
ISO 10664
2005
English

Hexalobular internal driving feature for bolts and screws

This International Standard specifies the shape and basic dimensions of the hexalobular internal driving feature for bolts and screws, including the gauging method. The curvature of the contou [...]