ISO 1302

Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation

English 2002
0.000
ISO
Detailed Information

This International Standard specifies the rules for the indication of surface texture in technical product documentation (e.g. drawings, specifications, contracts, reports) by means of graphical symbols and textual indications.

It is applicable to the indication of requirements for surfaces by means of
a) profile parameters, according to ISO 4287, related to the
– R-profile (roughness parameters),
– W-profile (waviness parameters), and
– P-profile (structural parameters),
b) motif parameters, according to ISO 12085, related to the
– roughness motif, and
– waviness motif,
c) parameters related to the material ratio curve according to ISO 13565-2 and ISO 13565-3.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 4161
1983
English

Hexagon nuts with flange – Product grade A

This International Standard specifies the characteristics of hexagon nuts with flange with thread sizes from M 5 to M 20 inclusive, in Product grade A.
DIN
DIN 705
1955
English

Bright Set Collars, Locked by Grub Screws or by Pins, Light Pattern Series

Set collars to Type A are furnished with grub screw to DIN 553.
DIN
DIN 6434
1984
English

Rivet sets

This standard specifies requirements and technical delivery conditions for rivet sets intended to be used with DIN 660, DIN 661, DIN 662 and DIN 674 rivets.
JIS
JIS B 0147
2004
English

Blind rivets—Terminology and definitions

This Standard specifies the terminology and definitions for types, performance characteristics and geometry for blind rivets and the terminology for blind rivet setting and setting equipmen […]
DIN
DIN 267-19
1984
German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Oberflächenfehler an Schrauben

Diese Norm ergänzt DIN 267 Teil 1 und Teil 2 sowie DIN ISO 898 Teil 1 und DIN ISO 4759 Teil 1. Sie enthält Festlegungen über die Ausschußkriterien für die verschiedenen Arten von Oberfläche […]
NASM
NASM 35333
2003
English

WASHER, LOCK, FLAT-INTERNAL TOOTH

MATERIAL: Carbon Steel, Grade 1050 to 1064. hardness 40 to 50 HRC or equivalent. Corrosion-Resistant Steel, Composition 410. Corrosion-resistant Steel, 300 series (UNS S300XX), hardness 35- […]
DIN EN
DIN EN 28739
1992
English

Full-length parallel grooved pins, with pilot (ISO 8739 : 1986) English version of DIN EN 28 739

This International Standard specifies the characteristics of full-length parallel grooved pins with pilot which have three equally spaced grooves impressed longitudinally on their exterior […]
ASTM
Abstract of ASTM F467
2001
English

NONFERROUS NUTS FOR GENERAL USE

1.1 This specification covers the requirements for commercial wrought nonferrous nuts 0.250 to 1.500 in. inclusive in diameter in a number of alloys in common use and intended for general s […]
JIS
JIS B 1058
1995
English

Mechanical properties of fasteners Part 7 : Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm

This Standard specifies a torsional test for the determination of the breaking torque of bolts and screws with nominal diameters 1 mm to 10 mm with property classes 8.8 to 12.9 in accordanc […]