ISO 262

ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts

English 1973

0.000

Detailed Information

This International Standard specifies ISO general purpose metric screw threads for screws, bolts and nuts in the
diameter range 1 to 39 mm.

These selected sizes are recommended also for general engineering use.

These screw threads are selected from ISO 261, ISO general purpose metric screw threads — General plan.

Download File

(Log in to download spec.)

Check out other specifications

ASTM

ASTM F812/F812M

1997

English

Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series

1.1 This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of metric-series nuts with nominal diam [...]

ASTM

ASTM A434

2004

English

Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered

1.1 This specification covers hot-wrought and cold-finished quenched and tempered alloy steel bars. 1.2 Hot-wrought bars are available in three strength level classes designated BB, BC, and BD, [...]

ISO

ISO 225

1983

English, French, Russian

Fasteners – Bolts, screws, studs and nuts – Symbols and designations of dimensions

This International Standard lays down the method of dimensioning bolts, screws, studs and nuts, recommended for use unless otherwise specified in the appropriate product Standards. It includes [...]

DIN EN

DIN EN 26157-1

1991

English

Fasteners – Surface discontinuities – Bolts, screws and studs subject to general requirements (ISO 6157-1 : 1988) (English version of DIN EN 26 157 Part 1)

1.1 This part of ISO 6157 establishes limits for various types of surface discontinuities on bolts, screws and studs for general requirements. It applies to bolts, screws and studs with - nomi [...]

DIN

DIN 962

1990

English

Designation system for fasteners

This standard specifies a system of designation for bolts, screws, studs and nuts (‘fasteners’, for short), and also gives supplementary order designations for special features and finishes of [...]

DIN

DIN 7500-2

1984

English

Thread rolling screws for ISO metric thread – Guideline values for hole diameters

This standard specifies hole diameters for thread rolling screws conforming to DIN 7500 Part 1. These hole diameters are the result of tests carried out by manufacturers and users. The values g [...]

JIS

JIS B 1022

1999

English

Tolerances for fasteners— Part 3 : Plain washers for bolts, screws and nuts—Product grades A and C

This Japanese Industrial Standard specifies a selection of tolerances for use in the preparation of the product standards for plain washers, grades A and C, for bolts, screws and nuts with nomi [...]

DIN

DIN 1160

1973

English

Clout or slate nails

Clout or slate nails shall be made of steel (grade at manufacturer’s discretion) and have a bright (bk) or galvanized (zn) finish.

ISO

ISO 7092

2000

English

Plain washers – Small series – Product grade A

This International Standard specifies the characteristics of small-series, product-grade-A plain washers in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters [...]