ISO 3800

Threaded fasteners — Axial load fatigue testing — Test methods and evaluation of results

English 1993
0.000
ISO
Detailed Information

This International Standard specifies the conditions for carrying out axial load fatigue tests on threaded fasteners, as well as recommendations for the evaluation of the results.

Unless otherwise agreed, the tests are of the fluctuating tension type and are carried out at room temperature, the loading applied being centric along the longitudinal axis of the fastener. The influence of the compliance of clamped parts on the strain of the fastener is not taken into account.

This method allows determination of the fatigue strength of threaded fasteners.

The test results can be influenced by the test conditions. For this reason, minimum requirements are specified to reduce this effect. In addition, calibration and centring control methods for the testing apparatus are included.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 1111
1996
English

Cross recessed head screws

This Japanese Industrial Standard specifies the steel cross recessed head screws (hereafter, referred to as “steel screws” ), stainless steel cross recessed head screws (hereafter, referred […]
DIN EN
DIN EN 14399-6
2006
English

High-strength structural bolting assemblies for preloading – Part 6: Plain chamfered washers (includes Corrigendum AC:2006) English version of DIN EN 14399-6:2006-06

This document specifies, together with EN 14399-1, hardened and tempered plain washers with chamfer intended for assembly with large series hexagon high-strength structural bolts and nuts w […]
ANSI
ANSI B18.2.4.6M
1990
English

METRIC HEAVY HEX NUTS

1.1 This standard covers the complete general and dimensional data for metric heavy hex nuts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard […]
DIN
DIN 6332
1993
English

Grub screws with thrust point

This standard specifies requirements for grub screws with a thrust point which, together with controlling elements, wing nuts or knurled nuts, are suitable for clamping with the thrust poin […]
ASTM
Abstract of ASTM F1135
1999
English

CADMIUM OR ZINC CHROMATE ORGANIC CORROSION PROTECTIVE COATINGS FOR FASTENERS

1.1 This specification covers the basic performance requirements for an electrolytic or mechanical coating of cadmium or zinc followed by a chromate and baked organic coating for ferrous an […]
ASTM
ASTM F468M
1997
English

Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]

1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws. and studs in nominal thread diameters M6 to M36 inclusive manufactured from a number […]
DIN EN
DIN EN 24014
1992
English

Hexagon head bolts – Product grades A and B (ISO 4014 : 1988) English version of DIN EN 24014

This International Standard gives specifications for hexagon head bolts with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to […]
DIN
DIN 924
1986
English

Slotted raised countersunk head screws with full dog point

The following amendments have been made in comparison with the August 1972 edition. a) Size M1,8 has been deleted because there is no demand for it. b) The previous design m as specified in […]
BS ISO
BS ISO 1891
2009
English, French, Russian

Fasteners – Terminology

This International Standard provides translation guidance for terms commonly used to describe fasteners. This International Standard lays down the terminology of fasteners in English, Frenc […]