ISO 4753

Fasteners – Ends of parts with external metric ISO thread

English 1983

0.000

Detailed Information

This International Standard lays down the form and dimensions of ends of parts with external metric ISO thread (for example, bolt and screw ends) recommended for use, unless otherwise specified in the appropriate product standard.

Download File

(Log in to download spec.)

Check out other specifications

DIN

DIN 653

1986

English

Knurled thin thumb screws

Where knurled thumb screws of sizes not less than M 2 shall be supplied threaded up to the head, letter A as specified in DIN 962 shall be stated in the designation (see example of designation given in clause 3).

ASME ANSI

ASME/ANSI B18.18.1M

1993

English

INSPECTION AND QUALITY ASSURANCE FOR GENERAL PURPOSE FASTENERS

This standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans, inspection frequencies, control procedures, and record keeping. Included in this plan are fasteners for genera […]

DIN

DIN 553

1986

English

Slotted set screws with cone point (modified version of ISO 7434, 1983 edition )

This standard specifies the characteristics of M 1 to M 12 slotted set screws with cone point, assigned to product grade A. Where, for special purposes, the screws are to meet requirements differing from those specified in the present standard, e.g. in respect of material (hardness class) […]

ASME

ASME B18.6.1

1997

English

WOOD SCREWS

This standard covers the complete general and dimensional data for the various types of slotted and recessed head wood screws recognized as "American National Standard." Also included are appendixes which provide specifications and instructions for penetration gaging, (see page H-52), and […]

DIN

DIN 431

2000

English

Pipe nuts with thread as in ISO 228-1

This standard specifies dimensions and technical delivery conditions for sizes G 1/8 to G 6 (hexagon and octagon) pipe nuts with thread as in ISO 228-1 and of product grades B and C.

BS EN

BS EN 14399-2

2015

English

High-strength structural bolting assemblies for preloading Part 2: Suitability for preloading

This European Standard specifies the technical requirements for high-strength structural bolting assemblies in order to ensure the suitability for preloading of bolted connections in metallic structures. A suitability test is specified to check the behaviour of the structural bolting ass […]