ISO 7042

Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12

English 2012
0.000
ISO
Detailed Information

This International Standard specifies the characteristics of prevailing torque type all-metal hexagon high nuts, with threads from M5 up to and including M36, in product grade A for threads up to and including M16 and product grade B for threads above M16, and with property classes 5, 8, 10 and 12.

Download File
(Log in to download spec.)

Check out other specifications

NASM
NASM 35206
2004
English

SCREW, MACHINE-PAN HEAD, CROSS-RECESSED, CARBON STEEL, CADMIUM PLATED, UNC-2A

THREADS SHALL BE IN ACCORDANCE WITH FED-STD-H28/2. ACCEPTABILITY OF SCREW THREADS SHALL BE IN ACCORDANCE WITH FED-STD-H28/20, SYSTEM 21.
JIS
JIS B 1044
2001
English

Fasteners—Electroplated coatings

This Standard specifies dimensional requirements for electroplated fasteners of steel or copper alloy. It specifies coating thicknesses and gives recommendations for hydrogen embrittlement reli [...]
DIN
DIN 1624
1987
English

Cold reduced mild unalloyed steel strip in widths not exceeding 650mm – Technical delivery conditions

1.1 This standard applies to cold reduced flat products (strip and lengths cut from it), without coating, in widths not exceeding 650 mm and thicknesses up to 6mm, made from mild unalloyed stee [...]
ASME
ASME Draft B18.2.7.1M
1999
English

METRIC 12-SPLlNE FLANGE SCREWS

1.1 This standard covers the complete general and dimensional data for metric 12-spline flange screws recognized as American National Standard. 1.2 The inclusion of dimensional data in this sta [...]
ASTM
ASTM B841
1999
English

Standard Specification for Electrodeposited Coatings of Zinc Nickel Alloy Deposits

1.1 This specification covers the requirements for electrodeposited zinc nickel alloy coatings on metals.
ISO
ISO 8734
1997
English

Parallel pins of hardened steel and martensitic stainless steel (Dowel pins)

This International Standard specifies the characteristics of parallel pins (dowel pins) of steel, through hardened or case hardened and martensitic stainless steel with nominal diameters, d, fr [...]
ASME
Abstract of ASME B1.13M
1995
English

METRIC SCREW THREADS – M PROFILE

This standard contains general metric standards for a 60 deg symmetrical screw thread with a basic ISO 68 profile designated M profile. The M profile threads of tolerance Class 6H/6g are intend [...]
DIN
DIN 6903
1990
English

Plain washers for tapping screw and washer assemblies

Washers as specified in this standard are intended for use with DIN 6901 tapping screw and washer assemblies.
JIS
JIS B 1043
1993
English

Fasteners—Surface discontinuities— Part 3 : Bolts, screws and studs for special requirements

This Standard establishes limits for various types of surface discontinuities on bolts, screws and studs for special requirements. It applies to bolts, screws and studs with — nominal thread [...]