ISO 724
ISO general-purpose metric screw threads – Basic dimensions
English
1993
0.000
Detailed Information
This International Standard specifies the basic dimensions, in millimetres, of ISO metric screw threads in accordance with ISO 261. The values refer to the basic profile in accordance with ISO 68.
Download File
(Log in to download spec.)
Check out other specifications
2008
English
Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
1.1 This practice covers the evaluation of the degree of rusting on painted steel surfaces. The visual examples which depict the percentage of rusting given in the written specifications form part of the standard. In the event of a dispute, the written definition prevails. These visual ex […]
1970
English
Countersunk (Flat) Head Tapping Screws with Slot
Normally, these tapping screws are made in the sizes for which weight details are given. It is not practicable to make the sizes for which dashes appear instead of length data. Technical conditions of delivery and materiel according to DIN 267 Sheet 12.
1974
English
Tangential Keys and Tangential Keyways for Alternating Shock Loads
The present Standard corresponds in substance to the ISO Draft ISO/DIS 3117-1973 Tangential keying While it is true that this ISO Draft deals only with tangential keys and keyways for constant loads (DIN 271), it none the less indicates that, for alternating shock loads, tangential keys w […]
2001
English
ALUMINUM TRANSMISSION TOWER BOLTS AND NUTS
1.1 This specification covers aluminum structural bolts and nuts for use in the construction of aluminum transmission towers, substations, and similar aluminum structures. 1.2 Diameters of bolts and nuts furnished to this specification are 5/8, 3/4, and 7/8 in. 1.3 The values stated in in […]
2004
English
Hexalobular socket head screws
This Standard specifies the characteristics of hexalobular socket head screws in product grades A and with nominal thread sizes from M2 up to and including M10. If other specifications than those listed in this Standard are required, they should be selected from existing JIS standards, f […]
1998
English
CLEARANCE HOLES FOR METRIC THREADED FASTENERS
1.1 This Recommended Practice presents clearance holes for metric threaded fasteners. 1.2 This Recommended Practice is in essential agreement with ISO 273. The differences are that the ISO standard does not include clearance holes for tapping screws and the recommended hole tolerances are […]