ISO 7417

Hexagon nuts for structural bolting – Style 2, hot-dip galvanized (oversize tapped) – Product grade A – Property class 9

English 1984
0.000
ISO
Detailed Information

This International Standard gives specifications for hexagon nuts, style 2, with metric dimensions, property class 9 hot-dip galvanized in accordance with ISO 1461 and tapped oversize to tolerance class 6AX. This International Standard covers product grade A nuts in thread diameters from M10 up to and including M16.

Download File
(Log in to download spec.)

Check out other specifications

ASTM
Abstract of ASTM F837M
1991
English

STAINLESS STEEL SOCKET HEAD CAP SCREWS [METRIC]

1.1 This specification covers the chemical and mechanical requirements for stainless steel metric socket head cap screws (SHCS) with nominal thread M1.6 through M36 and intended for use in […]
DIN
DIN 7971
1970
English

Pan Head Tapping Screws with Slot

Bracketed nominal diameters should be avoided wherever possible. Normally these tapping screws are made in the sizes for which weight details are given. It is not practicable to make the s […]
JIS
JIS B 1044
2001
English

Fasteners—Electroplated coatings

This Standard specifies dimensional requirements for electroplated fasteners of steel or copper alloy. It specifies coating thicknesses and gives recommendations for hydrogen embrittlement […]
DIN
DIN 267-10
1988
German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Feuerverzinkte Teile

Diese Technischen Lieferbedingungen gelten für mechanische Verbindungselemente {im wesentlichen Schrauben und Muttern) mit Regelgewinde M 6 bis M 36 und mit Zinküberzügen durch Feuerverzink […]
DIN
DIN 705
1955
English

Bright Set Collars, Locked by Grub Screws or by Pins, Light Pattern Series

Set collars to Type A are furnished with grub screw to DIN 553.
DIN
DIN 928
1983
English

Square weld nuts

The May 1970 edition of DIN 928 specified property class 8 with the suffix "weldable" for weld nuts. In the meantime, the proof loads for nuts in international specifications have been rais […]
DIN
DIN 6325
1971
German

Zylinderstifte, gehärtet – Toleranzfeld m6

Zylinderstifte nach dieser Norm werden hauptsächlich als Poßstifte für Werkzeuge, Spannzeuge und Meßzeuge verwendet.
ISO
ISO 1478
1983
English

Tapping screws thread

This International Standard specifies the thread and thread ends for tapping screws (sheet metal screws) with thread sizes from ST 1,5 to ST 9,5 inclusive.
ASTM
ASTM F606M
1995
English

STANDARD TEST METHODS FOR DETERMINING THE MECHANICAL PROPERTIES OF EXTERNALLY AND INTERNALLY THREADED FASTENERS, WASHERS, AND RIVETS [METRIC]

1.1 These test methods establish procedures for conducting tests to determine the mechanical properties of metric externally and internally threaded fasteners, washers, and rivets. 1.2 Prop […]