JIS B 0205-2

ISO general purpose metric screw threads — Part 2: General plan

English 2001
0.000
JIS
Detailed Information

This Standard specifies ISO general purpose metric screw threads (M) having basic profile according to JIS B 0205-1. Basic dimensions are given in JIS B 0205- 4. For tolerances see JIS B 0209-1.

Download File
(Log in to download spec.)

Check out other specifications

ASME ANSI
ASME/ANSI B18.18.1M
1993
English

INSPECTION AND QUALITY ASSURANCE FOR GENERAL PURPOSE FASTENERS

This standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans, inspection freq [...]
ISO
ISO 4014
1999
English

Hexagon head bolts — Product grades A and B

This International Standard specifies the characteristics of hexagon head bolts with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up [...]
ISO
ISO 14585
2001
English

Hexalobular socket pan head tapping screws

This International Standard specifies the characteristics of hexalobular socket pan head tapping screws with thread sizes from ST2,9 to ST6,3 inclusive.
IFI
IFI-301
2008
English

GAGE CALIBRATION REQUIREMENTS AND PROCEDURES FOR THREAD GAGES

All UN, UNJ, M, and MJ thread form gages shall be calibrated using the commonly accepted metrology techniques described in this standard using properly maintained standard metrology equipment. [...]
DIN
DIN 82
1973
English

Knurls

Compared with the January 1940 issue of DIN 82, the standard denomination "knurl" has been adopted for all types, since the previous denomination "diamond knurling" and "negative diamond knurli [...]
ASME
ABSTRACT OF ASME B1.1
2008
English

UNIFIED INCH SCREW THREADS (UN AND UNR THREAD FORM)

This Standard specifies the thread form, series, class, allowance, tolerance, and designation for unified screw threads. (In order to emphasize that unified screw threads are based on inch modu [...]
JIS
JIS B 1084
1990
English

Method of tightening test for threaded fasteners

This Japanese Industrial Standard specifies the method of test for obtaining characteristic value for tightening (hereafter referred to as "tightening characteristic value") by combination of b [...]
DIN
DIN 967
1994
English

Product grade A cross recessed pan head screws with collar

This standard specifies requirements for M 3 to M 8 cross recessed pan head screws assigned to product grade A. See DIN 962 (or the standards referred to therein) for special screw types or fin [...]
DIN
DIN 261
1987
English

T-head bolts

This standard specifies M8 to M100 x 6 T-head bolts. They are designed for use in attaching components to foundations or similar structures by means of T-sIots, such as are specified in DIN 649 [...]