JIS B 0218

Limit of sizes and tolerances for metric trapezoidal screw threads

English 1980
0.000
JIS
Detailed Information

This Japanese Industrial Standard specifies limit of sizes and tolerances for metric trapezoidal screw threads specified in JIS B 0216.

The limit of sizes and tolerances due to this standard do not apply to those with special requirements for axial displacement, for example, for lead screw.

Download File
(Log in to download spec.)

Check out other specifications

IFI
IFI-113
2007
English

STEEL SELF-DRILLING TAPPING SCREWS

1.1 Scope. This inch series standard covers requirements for steel, self-drilling, tapping screws suitable for use in general engineering applications. The objective of this standard is to ensure that self-drilling tapping screws, by meeting the mechanical and performance requirements sp […]
ASME ANSI
ASME/ANSI B18.2.2
1999
English

SQUARE AND HEX NUTS (INCH SERIES)

1.1.1 This standard is intended to cover the complete general and dimensional data for the various types of inch series square and hex nuts recognized as "American National Standard." Also included are appendixes covering gaging of slots in slotted nuts (Appendix I, page 0-20), wrench ope […]
IFI
IFI-148
2007
English

THREADED PROJECTION WELD STUDS

1.1.1 This document covers general and dimensional data for various types of weld studs having one or more integrally formed projections under or on top of the head suitable for resistance welding. 1.1.2 The inclusion of dimensional data in this standard is not intended to imply that only […]
DIN EN
DIN EN 28676
1992
English

Hexagon head screws with metric fine pitch thread – Product grades A and B – (ISO 8676: 1988) – English version of DIN EN 28 676

This International Standard gives specifications for hexagon head screws with metric fine pitch thread with nominal thread diameters from 8 to 64 mm, of product grade A for nominal thread diameters from 8 to 24 mm and nominal lengths, l, up to and including 10 d or 150 mm, whichever is sh […]
SAE
SAE J995
2011
English

MECHANICAL AND MATERIAL REQUIREMENTS FOR STEEL NUTS

This SAE Standard covers the mechanical and material requirements for three grades of steel nuts suitable for use in automotive and related engineering applications, in sizes 1/4 to 1-1/2 in., inclusive, and with dimensions conforming with the requirements of the latest issue of SAE J482 […]
ASME
ASME B18.16.4
2008
English

SERRATED HEX FLANGE LOCKNUTS 90,000 psi (INCH SERIES)

This Standard covers the general, dimensional, and mechanical performance requirements for low strength carbon steel, case hardened, regular and large serrated flange locknuts (inch series), recognized as American National Standard.