JIS B 0253

Gauges for taper pipe threads

English 1985
0.000
JIS
Detailed Information

This Japanese Industrial Standard specifies the taper thread gauge for pipe hereinafter referred to as the “thread gauge”, to be used for the dimensional inspection of the taper external thread for pipe (R), taper internal thread for pipe (Rc) and parallel internal thread for pipe (Rp), which are specified in JIS B 0203, hereinafter referred to as the “thread gauge”, and the gauge to be used for the inspection, hereinafter referred to as the “inspection plug”.

The general term for the thread gauge and inspection plug shall be called as “gauge”. Furthermore, the gauge applying to the taper thread for pipe (PT) and parallel internal thread for pipe (PS), which are specified in JIS B 0203, shall be in accordance with Appendix.

Download File
(Log in to download spec.)

Check out other specifications

DIN EN
DIN EN 10269
2006
German

Stähle und Nickellegierungen für Befestigungselemente für den Einsatz bei erhöhten und/oder tiefen Temperaturen; Deutsche Fassung EN 10269:1999 + A1:2006

Diese Europäische Norm EN 10269 legt die Anforderungen an Halbzeug, Stäbe und Draht für Befestigungselemente für den Einsatz bei erhöhten und/oder tiefen Temperaturen aus unlegierten und le […]
DIN
DIN 6917
1989
English

Square taper washers for high-strength structural bolting of steel I sections

Washers as specified in this standard are intended for use in GV and SL structural bolting of steel I sections in accordance with DIN 18 800 Part 1, together with DIN 6914 screws and DIN 6915 nuts.
ASTM
ASTM F606M
1995
English

STANDARD TEST METHODS FOR DETERMINING THE MECHANICAL PROPERTIES OF EXTERNALLY AND INTERNALLY THREADED FASTENERS, WASHERS, AND RIVETS [METRIC]

1.1 These test methods establish procedures for conducting tests to determine the mechanical properties of metric externally and internally threaded fasteners, washers, and rivets. 1.2 Prop […]
BS EN
BS EN 14399-3
2015
English

High-strength structural bolting assemblies for preloading Part 3: System HR — Hexagon bolt and nut assemblies

This European Standard specifies, together with EN 14399-1 and EN 14399-2, the requirements for assemblies of high-strength structural bolts and nuts of system HR suitable for preloaded joi […]
ASTM
Abstract of ASTM A307
2000
English

CARBON STEEL EXTERNALLY THREADED STANDARD FASTENERS

1.1 This specification covers the chemical and mechanical requirements of three grades of carbon steel bolts and studs, in sizes 1/4 in. through 4 in. The fasteners are designated by "Grade […]
DIN
DIN 2999-2
1973
English

Whitworth Pipe Threads for Tubes and Fittings – Cylindrical Internal Thread and Conical External Thread – Gauging System and Use of Gauges

The gauging system takes account of the function of the screwed joints and of practical installation requirements. The cylindrical internal thread is therefore gauged with a conical screw l […]
JIS
JIS B 1041
1993
English

Fasteners—Surface discontinuities— Part 1 : Bolts, screws and studs for general requirements

This Standard establishes limits for various types of surface discontinuities on bolts, screws and studs for general requirements. It applies to bolts, screws and studs with — nominal thre […]
NF
NF E 25-511
1984
French

RONDELLES CONIQUES STRIÉES DE SERRAGE Symbole CS

La présente norme fixe les caractéristiques des rondelles coniques striées de serrage en acier au carbone, et définit les essais à effectuer pour leur contrôle. Elles sont généralement ut […]
JIS
JIS B 1010
2003
English

Designation system for fasteners

This Standard specifies a system for the designation of fasteners in product standards.