JIS B 1015

Hexalobular internal driving feature for bolts and screws

English 2001
0.000
JIS
Detailed Information

This Standard specifies the shape and basic dimensions of hexalobular internal driving feature for bolts and screws including the gauging method.

The curvature of the contour of the hexalobular internal driving feature is defined by the gauges specified in Tables 3, 4 and 5. Additional information which may be used when drawing the contour is given in the informative annex A.

The intent of this Standard is to provide the details necessary for inspection of the hexalobular driving feature. It is not suitable for, nor intended to be used as a manufacturing standard.

Download File
(Log in to download spec.)

Check out other specifications

DIN EN
DIN EN 10269 Berichtigung 1
2006
German

Stähle und Nickellegierungen für Befestigungselemente für den Einsatz bei erhöhten und/oder tiefen Temperaturen; Deutsche Fassung EN 10269:1999 + A1:2006, Berichtigungen zu DIN EN 10269:2006-07; Deutsche Fassung EN 10269:1999/A1:2006/AC:2006

Es wird empfohlen, auf der betroffenen Norm einen Hinweis auf diese Berichtigung zu machen.
MIL
MIL-A-8625F
1993
English

ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS

This specification covers the requirements for six types and two classes of electrolytically formed anodic coatings on aluminum and aluminum alloys for non-architectural applications.
DIN
DIN 68163
1982
English

Nails for assembling timber pallets

This standard specifies requirements for nails used in the assembly of timber pallets.
ANSI
ANSI B18.2.4.3M
1995
English

METRIC SLOTTED HEX NUTS

1.1 This standard covers the complete general and dimensional data for metric slotted hex nuts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standa […]
DIN
DIN 1544
1975
English

Plat Steel Products – Cold Rolled Steel Strip – Dimensions, Permissible Variations on Dimensions and Form

1.1. This Standard applies to cold rolled flat products ≥ 0.10 ≤ 6 mm thick without surface coatings, and in particular to cold rolled strip in rolling widths ≤ 650 mm and bars cut from suc […]
DIN
DIN 125-2
1990
English

Product grade A washers with a hardness from 300 HV designed for use with hexagon head bolts and nuts

This standard specifies requirements for product grade A washers with a hardness of 300 HV or more. The preferred application of these washers is in product grades A and B hexagon head bolt […]
DIN
DIN 967
1994
English

Product grade A cross recessed pan head screws with collar

This standard specifies requirements for M 3 to M 8 cross recessed pan head screws assigned to product grade A. See DIN 962 (or the standards referred to therein) for special screw types or […]
DIN
DIN 267-1
1982
English

Fasteners – Technical delivery conditions – General requirements

This standard applies to standardized fasteners (mainly bolts, screws, nuts and similar threaded and formed parts) as finished components in the condition on delivery, in so far as no speci […]
DIN EN
DIN EN 28752
1993
English

Slotted spring-type straight pins (ISO 8752: 1987) English version of DIN EN 28 752

This International Standard specifies the characteristics of slotted spring-type straight pins with metric dimensions and nominal diameters, d1, from 1 to 50 mm Inclusive.