DIN 96

Slotted round head wood screws

English 1986
0.000
DIN
Detailed Information

The following amendments have been made in comparison with the March 1975 edition.
a) Nominal lengths 90 mm and 100 mm have been deleted in order to bring this standard into line with the other standards on wood screws.
b) Type g has been replaced by product grade C.
c) The content of the standard his been revised.

Download File
(Log in to download spec.)

Check out other specifications

ASTM
ASTM F2437
2006
English

CARBON AND ALLOY STEEL COMPRSSIBL-WASHER-TYPE DIRECT TENSION INDICATORS FOR USE WITH CAP SCREWS, BOLTS, ANCHORS, AND STUDS

1.1 This specification covers the requirements for carbon and alloy steel compressible-washer-type direct tension indicators capable of indicating a specified bolt tension in cap screws, bolts, [...]
ASTM
ASTM C1002
2007
English

STEEL SELF-PIERCING TAPPING SCREWS FOR THE APPLICATION OF GYPSUM PANEL PRODUCTS OR METAL PLASTER BASES TO WOOD STUDS OR STEEL STUDS

1.1 This specification covers steel self-piercing tapping screws for use in fastening gypsum panel products and metal plaster bases to cold-formed steel studs less than 0.033 in. (0.84 mm) in t [...]
ISO
ISO 4753
2011
English

Fasteners – Ends of parts with external ISO metric thread

This International Standard specifies the form and dimensions of ends of parts with external ISO metric screw thread (e.g. bolt, screw and stud ends) recommended for use. They apply to standard [...]
DIN
DIN 661
1993
English

Countersunk head rivets with nominal diameters from 1 to 8 mm

This standard specifies dimensions of steel and nonferrous metal countersunk head rivets with nominal diameters from 1 to 8 mm.
DIN
DIN 6904
1990
English

Curved spring washers for screw and washer assemblies

Curved spring washers as specified in this standard are intended for use with screw and washer assemblies as specified in DIN 6900 Part 2. They are designed for use with bolted connections with [...]
DIN EN
DIN EN 22341
1992
English

Clevis pins with head (ISO 2341 : 1986) English version of DIN EN 22 341

This International Standard specifies the characteristics of clevis pins with head, with metric dimensions and nominal diameters, d, from 3 to 100 mm inclusive.
ASTM
ASTM A240/A240M
2011
English

Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

1.1 This specification covers chromium, chromium-nickel, and chromium-manganese-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications. 1.2 The values [...]
JIS
JIS B 0205-3
2001
English

ISO general purpose metric screw threads — Part 3: Selected sizes for screws, bolts and nuts

This Standard specifies selected sizes for screws, bolts and nuts in the diameter range from 1 mm to 64 mm of ISO general purpose metric screw threads (M) having basic profile according to JIS [...]
DIN
DIN 562
1987
English

Square thin nuts Product grade B

This standard specifies requirements for M1,6 to M10 square thin nuts assigned to product grade B. If, in special cases, nuts are to comply with specifications other than those given in this st [...]