DIN 127

Spring lock washers with square ends or tang ends

English 1987
0.000
DIN
Detailed Information

Spring lock washers covered in this standard are deemed to be spring washers designed for use with bolt/nut assemblies involving fasteners of property class 5.8 or less, as specified in ISO 898 Part 1. They are intended to counteract the effect of setting which results in bolt/nut assemblies working loose (see DIN 267 Part 26). They do not effectively prevent loosening of the assembly under varying radial load and are designed for use with short bolts predominantly subject to thrust.

Download File
(Log in to download spec.)

Check out other specifications

DIN EN
DIN EN 10130
1991
English

Cold rolled flat steel products for cold forming – Technical delivery conditions – English version of DIN EN 10130

This European Standard applies to cold rolled non-coated low carbon steel flat products in rolled widths equal to or over 600 mm for cold forming, with a minimum thickness of 0,35 mm, and unles [...]
DIN
DIN 553
1986
English

Slotted set screws with cone point (modified version of ISO 7434, 1983 edition )

This standard specifies the characteristics of M 1 to M 12 slotted set screws with cone point, assigned to product grade A. Where, for special purposes, the screws are to meet requirements diff [...]
DIN
DIN 7965
1965
English

Screwed Inserts (Screw Plugs)

These screwed inserts are intended primarily for screwing into wood or wood-like materials.
DIN
DIN 937
1983
English

Hexagon thin castle nuts (previous design)

This standard gives specifications for hexagon thin castle nuts with metric threads ranging from 6 to 52 mm nominal thread diameter, assigned to product grades A (up to and including 16 mm nomi [...]
JIS
JIS B 1012
1986
English

Cross recesses for screws

This Japanese Industrial Standard specifies the shape, dimensions and measuring method for cross recesses formed on the heads of machine screws, wood screws, tapping screws and the like, herein [...]
DIN
DIN 547
1986
English

Round nuts with drilled holes in one face

Round nuts with drilled holes in one face are parts generally made of steel, stainless steel or non-ferrous metals, which are designed to be used for various purposes, as for instance in electr [...]
DIN
DIN 6921
1983
English

Hexagon flange bolts

This standard specifies product grade A hexagon flange bolts with metric coarse screw thread or metric fine screw thread from 5 up to and including 20 mm nominal thread diameter. If, in special [...]
DIN
DIN 936
1976
English

Hexagon Thin Nuts (Old Type)

Hexagon nuts according to this Standard are still specified for a period not as yet determined for replacement needs and for existing designs only. For new designs, hexagon nuts according to D [...]
DIN
DIN 96
1986
English

Slotted round head wood screws

The following amendments have been made in comparison with the March 1975 edition. a) Nominal lengths 90 mm and 100 mm have been deleted in order to bring this standard into line with the other [...]