DIN 434
Square taper steel washers for use with channel sections
English
2000
0.000
Detailed Information
This standard specifies dimensions and technical delivery conditions for square taper washers for use in structural bolting of steel channel sections using bolts up to property class 5.6.
Download File
(Log in to download spec.)
Check out other specifications
2003
English
Tolerances for fasteners — Part 1 : Bolts, screws, studs and nuts — Product grades A, B and C
This Standard specifies a selection of tolerances for bolts, screws, studs and nuts with ISO metric threads and with product grades A, B and C and for tapping screws with product grade A.
1992
English
Hexagon head pipe plugs
This standard specifies dimensions and technical delivery conditions for pipe plugs which are intended to be screwed Into holes with parallel thread as specified in DIN 13 Part 12, DIN 158, DIN 3858 or ISO 228 Part 1. Since tightness is a function of pressure, temperature, the materials i […]
1995
English
SPRING PINS – COILED TYPE [METRIC SERIES]
Coiled spring pins shall have straight cylindrical sides with both ends chamfered. They are available in standard duty, heavy duty, and light duty to suit various design requirements. Coiled type spring pins have multiple walls, are spirally wrapped from strip stock to a diameter larger t […]
2000
English
ISO metric thread rolling screws Part 1: Types, designation and requirements
This standard specifies dimensions, the designation and requirements for design and dimensional accuracy of ISO metric thread rolling screws. For further dimensions, tolerances, materials, mechanical and performance requirements, testing and acceptance inspection of thread rolling screws, […]
1992
English
Hexagon head bolts with metric fine pitch thread – Product grades A and B (ISO 8765 : 1988) English version of DIN EN 28 765
This International Standard gives specifications for hexagon head bolts with metric fine pitch thread with nominal thread diameters d from 8 to 64 mm of product grade A for nominal thread diameters d from 8 to 24 mm and nominal lengths, l, up to and including 10d or 150 mm, whichever is s […]