DIN 933

M 1,6 to M 52 hexagon head screws threaded up to the head – Product grades A and B

English 1987
0.000
DIN
Detailed Information

This standard specifies requirements for M1,6 to M52 hexagon head screws threaded up to the head, assigned to product grade A, for sizes up to M24 and length not exceeding 10d or 150mm, and to product grade B for sizes greater than M24 or length exceeding 10d or 150mm.

Download File
(Log in to download spec.)

Check out other specifications

ASME ANSI
ASME/ANSI B18.3.5M
1993
English

METRIC HEXAGON SOCKET FLAT COUNTERSUNK HEAD CAP SCREWS

1.1.1 This standard contains complete general and dimensional requirements for metric series hexagon socket flat countersunk head cap screws of nominal sizes from 3 mm to 20 mm recognized as Am [...]
ISO
ISO 3506-2
2009
English

Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts

This part of ISO 3506 specifies the mechanical properties of nuts made of austenitic, martensitic and ferritic steel grades of corrosion-resistant stainless steels, when tested over an ambient [...]
JIS
JIS B 1044
2001
English

Fasteners—Electroplated coatings

This Standard specifies dimensional requirements for electroplated fasteners of steel or copper alloy. It specifies coating thicknesses and gives recommendations for hydrogen embrittlement reli [...]
DIN
DIN 835
1995
English

Studs with a length of engagement equal to about 2 d

This standard specifies dimensions and technical delivery conditions for studs intended for use mainly in aluminium alloys. As specified in DIN 267-2, the stud end thread shall be produced to t [...]
JIS
JIS B 1125
2003
English

Self drilling tapping screws

This Japanese Industrial Standard specifies self drilling tapping screws of steel made (hereafter referred to as “steel drilling tapping screws”) and those of martensitic stainless steel made ( [...]
DIN
DIN 46241-1
1956
English

Telecommunications Engineering – Contact Rivets – Solid or Clad – Technical Conditions of Delivery

These conditions of delivery apply to solid and clad contact rivets according to DIN 46240 Sheet 1 made of contact materials which can be shaped by nonoutting methods, e.g. silver , and contact [...]
MIL
MIL-DTL-25027H
1997
English

NUT, SELF-LOCKING, 250° F, 450° F, AND 800° F

This specification covers self-locking nuts for use in temperatures of 250° F, 450° F, and 800° F (see 6.1).
ANSI
ANSI B18.2.4.3M
1995
English

METRIC SLOTTED HEX NUTS

1.1 This standard covers the complete general and dimensional data for metric slotted hex nuts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard i [...]
ASTM
ASTM F912M
1997
English

Standard Specification for Alloy Steel Socket Set Screws [Metric]

1.1 This specification covers the requirements for quenched and tempered alloy steel socket set screws (SSS) M1.6 through M24 sizes having hardnesses 45 to 53 HRC, ISO 898/5 property class 45H.