Check out other specifications
2001
English
ALUMINUM TRANSMISSION TOWER BOLTS AND NUTS
1.1 This specification covers aluminum structural bolts and nuts for use in the construction of aluminum transmission towers, substations, and similar aluminum structures. 1.2 Diameters of bolts and nuts furnished to this specification are 5/8, 3/4, and 7/8 in. 1.3 The values stated in inch-pound...
1997
English
Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric]
1.1.1 Type 1-Bolts made of medium-carbon steel. 1.1.2 Type 2-Bolts made from what is generally described as low-carbon martensite steel. 1.1.3 Type 3-Bolts made of steel having atmospheric corrosion resistance and weathering characteristics comparable to that of the steel covered in Specification...
1988
English
Fasteners – Acceptance inspection
1.1 This International Standard specifies the procedure to be followed by the purchaser at his acceptance inspection in order to decide whether a lot of fasteners may be accepted or rejected, when no other acceptance procedure has been agreed with the supplier at the time of ordering the fastener...
1976
English
Hexagon Thin Nuts (Old Type)
Hexagon nuts according to this Standard are still specified for a period not as yet determined for replacement needs and for existing designs only. For new designs, hexagon nuts according to DIN 439 are recommended which conform with the conclusions of Technical Committee ISO/TC 2 "Fasteners" of...
1984
German
Mechanische Verbindungselemente – Technische Lieferbedingungen – Ausführung und Maßgenauigkeit – Beispiele für Toleranzangaben
In den nachfolgenden Bildtafeln sind - nach den Produktklassen A, B und C (bisher Ausführungen m, mg und g) geordnet - die aus DIN ISO 4759 Teil 1 und den bisherigen Festlegungen in DIN 267 Teil 2, Ausgabe April 1968, entnommenen Maßtoleranzen den verschiedenen DIN-Normen über Schrauben und Mutte...
1998
English
Mechanical properties of steel nuts
This Japanese Industrial Standard specifies mechanical properties of steel nuts.