DIN EN 22341

Clevis pins with head (ISO 2341 : 1986) English version of DIN EN 22 341

English 1992

0.000

Detailed Information

This International Standard specifies the characteristics of clevis pins with head, with metric dimensions and nominal diameters, d, from 3 to 100 mm inclusive.

Download File

(Log in to download spec.)

Check out other specifications

DIN

DIN 934

1987

English

Hexagon nuts with metric coarse and fine pitch thread – Product classes A and B

This standard specifies requirements for M1 to M160 hexagon nuts, assigned to product grade A (up to size M16) or product grade B (for sizes above M16). lf, in special cases, nuts are to comply with specifications other than those given in this standard, e.g. regarding property class, they shall ...

ASTM

ASTM A574

2008

English

ALLOY STEEL SOCKET-HEAD CAP SCREWS

1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket-head cap screws, 0.060 through 4 in. in diameter where high strength is required. 1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are includ...

ISO

ISO 4753

2011

English

Fasteners – Ends of parts with external ISO metric thread

This International Standard specifies the form and dimensions of ends of parts with external ISO metric screw thread (e.g. bolt, screw and stud ends) recommended for use. They apply to standardized or non-standardized threaded parts. For each end type, a symbol is specified and it is intended th...

DIN EN

DIN EN 26157-3

1991

English

Fasteners – Surface discontinuities – Bolts, screws and studs subject to special requirements (ISO 6157 -3 : 1988) (English version of DIN EN 26 157 Part 3)

This part of ISO 6157 establishes limits for various types of surface discontinuities on bolts, screws and studs for special requirements. It applies to bolts. screws and studs with - nominal thread diameters 5 mm and larger; - product grades A and B; - nominal lengths l < 10d (or longer if spec...

ASTM

ASTM F879M

1991

English

Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]

1.1 This specification covers the chemical and mechanical requirements for stainless steel metric hexagon socket button (SBHCS) and flat countersunk (SFHCS) head cap screws with nominal thread M 3 through M 20 intended for use in applications requiring general corrosion resistance. 1.2 Two proper...

DIN

DIN 267-21

1981

German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Aufweitversuch für Muttern

1 Geltungsbereich Diese Norm ergänzt DIN 267 Teil 1 und Teil 4, sowie DIN lSO 898 Teil 2 und enthält Festlegungen über einen Aufweitversuch für Muttern mit Festigkeitsklassen nach DIN ISO 898 Teil 2 und DIN 267 Teil 4 mit Gewindedurchmessern von 3 bis 39 mm. 2 Zweck Der Aufweitversuch nach diese...