DIN EN 24018
Hexagon head screws – Product grade C (ISO 4018: 1988) English version of DIN EN 24 018
English
1992
0.000
Detailed Information
This International Standard gives specifications for hexagon head screws with threads from M5 up to and including M64, of product grade C.
Download File
(Log in to download spec.)
Check out other specifications
1988
English
Fasteners – Acceptance inspection
1.1 This International Standard specifies the procedure to be followed by the purchaser at his acceptance inspection in order to decide whether a lot of fasteners may be accepted or rejected, when no other acceptance procedure has been agreed with the supplier at the time of ordering the fastener...
2015
English
High-strength structural bolting assemblies for preloading Part 3: System HR — Hexagon bolt and nut assemblies
This European Standard specifies, together with EN 14399-1 and EN 14399-2, the requirements for assemblies of high-strength structural bolts and nuts of system HR suitable for preloaded joints with large widths across flats, thread sizes M12 to M36 and property classes 8.8/8 or 8.8/10 and 10.9/10...
2011
English
FASTENERS FOR USE IN STRUCTURAL APPLICATIONS
1.1.1 This Standard covers the complete general and dimensional data for five products in the inch series recognized as an American National Standard. These five structural products include: a. Heavy Hex Structural Bolts: ASTM A325 and ASTM A490 b. Heavy Hex Nuts: ASTM A563 and ASTM A194 c. Harde...
2002
English
SURFACE DISCONTINUITIES OF BOLTS, SCREWS, AND STUDS
This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of bolts, screws, and studs. including heat treated machine screws, tapping screws, and SEMS (the washers of screw-washer assemblies are excluded)....