ISO 724
ISO general-purpose metric screw threads – Basic dimensions
English
1993
0.000
Detailed Information
This International Standard specifies the basic dimensions, in millimetres, of ISO metric screw threads in accordance with ISO 261. The values refer to the basic profile in accordance with ISO 68.
Download File
(Log in to download spec.)
Check out other specifications
2000
English
ALLOY STEEL SOCKET SET SCREWS
1.1 This specification covers the requirements for quenched and tempered alloy steel socket set screws (SSS) 0.060 thru 2.000 in. sizes having hardnesses 45 to 53 HRC. 1.2 These set screws are intended for compression applications only and are not customarily subjected to embrittlement tests. For...
1991
English
STAINLESS STEEL SOCKET HEAD CAP SCREWS [METRIC]
1.1 This specification covers the chemical and mechanical requirements for stainless steel metric socket head cap screws (SHCS) with nominal thread M1.6 through M36 and intended for use in applications requiring general corrosion resistance.
2006
English
LARGE RIVETS 1/2 IN. NOMINAL DIAMETER AND LARGER
This standard covers complete general and dimensional data for those types of large solid rivets recognized as “American National Standard" together with dimensional data applicable to manufactured heads after driving, driven heads, and hold-on (dolly bar) and rivet set impressions. Also included...
1984
French
RONDELLES CONIQUES STRIÉES DE SERRAGE Symbole CS
La présente norme fixe les caractéristiques des rondelles coniques striées de serrage en acier au carbone, et définit les essais à effectuer pour leur contrôle. Elles sont généralement utilisées avec des vis à métaux de grade A ou B, de diamètre 3 à 20 mm, de classes de qualité 6.8 et 8.8, et a...