ISO 885

General purpose bolts and screws – Metric series – Radii under the head

English 1976
0.000
ISO
Detailed Information

This International Standard specifies the sizes of the radii under the head of metric series general purpose bolts and screws.

Download File
(Log in to download spec.)

Check out other specifications

ASME
ASME B18.2.9
2010
English

STRAIGHTNESS GAGE AND GAGING FOR BOLTS AND SCREWS

1 SCOPE This Standard describes a gage and procedure for checking bolt or screw straightness at maximum material condition (MMC) and provides default limits when not stated in the applicable pr [...]
DIN
DIN 661
1993
English

Countersunk head rivets with nominal diameters from 1 to 8 mm

This standard specifies dimensions of steel and nonferrous metal countersunk head rivets with nominal diameters from 1 to 8 mm.
ASTM
ASTM A31
1995
English

Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

1.1 This specification covers steel rivets for use in boilers and pressure vessels and steel bars for use in the manufacture of rivets. 1.2 Two grades are covered: 1.2.1 Grade A-Bars having a [...]
NASM
NASM 51959
1999
English

SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 82°, CROSS-RECESSED, CORROSION-RESISTANT STEEL, UNC-2A

MATERIAL: AUSTENITIC CORROSION-RESISTANT STEEL SCREWS SHALL BE MANUFACTURED FROM TYPE 302 (UNS S30200), TYPE 304 (UNS S30400). TYPE 304L (UNS S30403). TYPE 305 (UNS S30500), TYPE 316 (UNS 53160 [...]
IFI
IFI-130
2008
English

STRUCTURAL SPLITTING SELF-PLUGGING PULL MANDREL BLIND RIVETS

This standard establishes the dimensional, mechanical and performance requirements for structural splitting self-plugging pull mandrel blind rivets suitable for use in engineering assemblies wh [...]
ASTM
Abstract of ASTM A394
2000
English

STEEL TRANSMISSION TOWER BOLTS, ZINC COATED AND BARE

1.1 This specification covers the chemical and mechanical requirements of hexagon and square-head zinc coated steel bolts and atmospheric corrosion resistant bolts , in nominal thread diameters [...]
DIN
DIN 1151
1973
English

Round plain head and countersunk head wire nails

Wire nails shall be made of steel (grade at manufacturer's discretion) and have a bright (bk), galvanized (zn) or metallized (me) finish.
DIN
DIN 440
1990
English

Washers for use in timber constructions

This standard specifies requirements for product grade C washers with a larger outside diameter. Such washers may be provided with a round hole (type R) for M5 to M52 bolts or a square hole (ty [...]
IFI
IFI-119
2008
English

STRUCTURAL FLUSH BREAK PULL MANDREL SELF-PLUGGING BLIND RIVETS

This standard establishes the dimensional, mechanical, and performance requirements of inch series structural flush break pull mandrel self-plugging blind rivets suitable for use in joining the [...]