ISO 1479

Hexagon head tapping screws

English 1983

0.000

Detailed Information

This International Standard specifies the characteristics of hexagon head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.

Download File

(Log in to download spec.)

Check out other specifications

DIN

DIN 964

1970

English

Slotted Raised Countersunk (Oval) Head Screws (Countersunk Heads according to ISO)

Intermediate lengths should as fer as possible be avoided. Lengths over 60 mm should be arranged in 10 mm steps. Normally these screws are manufactured in the sizes characterized by the quote [...]

DIN

DIN 6886

1967

English

Stressed-type Fastenings with Taper Action – Taper Keys – Keyways – Dimensions and Application

For the time being no permissible variations have been laid down for the taper on the key and in the hub keyway. If special conditions make necessary the observance of certain permissible varia [...]

ANSI

ANSI B18.2.3.8M

1991

English

METRIC HEX LAG SCREWS

1.1 This standard covers the complete general and dimensional data for metric hex lag screws recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is [...]

DIN

DIN 6912

1985

English

Hexagon socket thin head cap screws with pilot recess for wrench key

This standard specifies product grade A hexagon socket thin head cap screws with pilot recess for wrench key with ISO metric screw thread from M4 up to and including M36. If, in special cases, [...]

Custom

John Deere | JDM F25

2022

English

Specification for Zinc Flake Coatings for Bolted Joints

1.1 JDM F25 specifies requirements for black color appearance, hexavalent chromium-free zinc flake coatings with a 0.09-0.16 coefficient of friction (CoF) requirement. Two levels of corrosion r [...]

DIN

DIN 580

1972

English

Lifting Eye Bolts

The February 1956x edition of DIN 580 Part 1 specified Siemens-Martin steel St 34 or C 15 as materials for the manufacture of lifting eye bolts, at manufacturer's choice. The present new editio [...]

DIN

DIN 938

1995

English

Studs – with a length of engagement equal to about 1 d

This standard specifies dimensions and technical delivery conditions for studs intended for use mainly in steel. As specified in DIN 267-2, the stud end thread shall be produced to tolerance Sk [...]

DIN

DIN 6881

1956

English

Taper Key Torque Transmission – Saddle Keys – Dimensions and Application

No figures for permissible variations of tapers on keys and in hub keyways have so far been laid down. If, in special cases, certain prescribed permissible variations must be observed, these mu [...]

NASM

NASM 16562

1998

English

PIN, SPRING-TUBULAR, SLOTTED

MATERIAL: STEEL, CARBON, GRADE 1070 THRU 1095 (UNS G10700 THRU G10950) IN ACCORDANCE WITH PROCUREMENT SPECIFICATION. STEEL, CORROSION-RESISTANT, TYPES 410(UNS S41000) AND 420(UNS S42000) IN ACC [...]