ISO 4753

Fasteners – Ends of parts with external metric ISO thread

English 1983
0.000
ISO
Detailed Information

This International Standard lays down the form and dimensions of ends of parts with external metric ISO thread (for example, bolt and screw ends) recommended for use, unless otherwise specified in the appropriate product standard.

Download File
(Log in to download spec.)

Check out other specifications

DIN EN
DIN EN 10269 Berichtigung 2
2007
German

Stähle und Nickellegierungen für Befestigungselemente für den Einsatz bei erhöhten und/oder tiefen Temperaturen; Deutsche Fassung EN 10269:1999 + A1:2006, Berichtigungen zu DIN EN 10269:2006-07

Es wird empfohlen, auf der betroffenen Norm einen Hinweis auf diese Berichtigung zu machen.
ISO
ISO 8734
1997
English

Parallel pins of hardened steel and martensitic stainless steel (Dowel pins)

This International Standard specifies the characteristics of parallel pins (dowel pins) of steel, through hardened or case hardened and martensitic stainless steel with nominal diameters, d, from 1 mm to 20 mm inclusive.
ISO
ISO 3269
1988
English

Fasteners – Acceptance inspection

1.1 This International Standard specifies the procedure to be followed by the purchaser at his acceptance inspection in order to decide whether a lot of fasteners may be accepted or rejected, when no other acceptance procedure has been agreed with the supplier at the time of ordering the […]
ASTM
Abstract of ASTM F901
2001
English

ALUMINUM TRANSMISSION TOWER BOLTS AND NUTS

1.1 This specification covers aluminum structural bolts and nuts for use in the construction of aluminum transmission towers, substations, and similar aluminum structures. 1.2 Diameters of bolts and nuts furnished to this specification are 5/8, 3/4, and 7/8 in. 1.3 The values stated in in […]
DIN
DIN 8243
1969
English

Slotted Cheese Head Screws for Fine Mechanics M 0.3 to M 1.4

In the field of fine mechanics space conditions are often difficult, so that the correlation of a single head size to a given thread diameter fails to meet the requirements arising in applications involving small screws. To provide the widest possible range of variation whilst keeping the […]
DIN
DIN 267-18
1981
German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Teile aus Nichteisenmetallen

Diese Norm gilt für mechanische Verbindungselemente mit Gewinde (im wesentlichen Schrauben und Muttern) als Fertigteile aus Nichteisenmetallen (Schwermetalle und Leichtmetalle) mit - metrischem ISO-Gewinde nach DIN 13, - Blechschraubengewinde nach DIN 7970, - Holzschraubengewinde nach DIN […]