ISO 5408

Cylindrical screw threads – Vocabulary

English French 1983
0.000
ISO
Detailed Information

This International Standard provides fundamental terms and definitions in English and French applicable to cylindrical screw threads with profiles (in an axial plane) based on triangles. A list of Russian equivalent terms is given in annex A.

Download File
(Log in to download spec.)

Check out other specifications

Custom
General Motors | GM6174M
2001
English

Corrosion Protective Coatings Phosphate/Organic/Oil Type

This specification covers basic requirements for a black corrosion protective coating which is produced in a process consisting of zinc phosphate treatment, chromic acid rinse or seal, organic coating, oven bake, water and oil emulsion post treatment and air dry.
ASTM
ASTM A354
2007
English

QUENCHED AND TEMPERED ALLOY STEEL BOLTS, STUDS, AND OTHER EXTERNALLY THREADED FASTENERS

This specification covers the chemical and mechanical requirements of quenched and tempered alloy steel bolts, studs, and other externally threaded fasteners 4 in. and under in diameter for application at normal atmospheric temperatures, where high strength is required and for limited app […]
JIS
JIS B 1054-3
2001
English

Mechanical properties of corrosion-resistant stainless-steel fasteners— Part 3 : Set screws and similar fasteners not under tensile stress

This part of JIS B 1054 specifies the mechanical properties of set screws and similar fasteners not under tensile stress made of austenitic stainless steel when tested over an ambient temperature range of 15 °C to 25 °C. Properties will vary at higher or lower temperatures.
ASTM
Abstract of ASTM A307
2000
English

CARBON STEEL EXTERNALLY THREADED STANDARD FASTENERS

1.1 This specification covers the chemical and mechanical requirements of three grades of carbon steel bolts and studs, in sizes 1/4 in. through 4 in. The fasteners are designated by "Grade" denoting tensile strength and intended use, as follows: Grade A Bolts and studs having a minimum t […]
DIN
DIN 961
1990
English

M8 x 1 to M52 x 3 hexagon head bolts with fine pitch thread – Product grades A and B

This standard specifies requirements for M8 to M52 hexagon head bolts threaded up to the head. with metric fine pitch thread, assigned to product grade A for sizes up to M24 and lengths not exceeding 10 d or 150 mm, whichever is shorter, and product grade B for sizes larger than M24 or le […]
DIN EN
DIN EN 24033
1991
English

Style 2 hexagon nuts – Product grades A and B (ISO 4033 : 1979) English version of DIN EN 24 033

This International Standard gives specifications for hexagon nuts, style 2, with metric dimensions and thread diameters from 5 up to and including 36mm, with product grade A for sizes≤M16 and product grade B for sizes>M16.