Check out other specifications
2013
English
Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
This practice covers recommendations and precautions for cleaning, descaling, and passivating of new stainless steel parts, assemblies, equipment, and installed systems. These recommendations are presented as procedures for guidance when it is recognized that for a particular service it is desire...
1986
English
Knurled thumb screws
The following amendments have been made in comparison with the December 1970 edition of the present standard and the December 1970 edition of DIN 465. a) DIN 464 and DIN 465 have been combined into one standard. b) Symbol Sz has been included for the slotted design as specified in DIN 962. c) The...
1987
English
Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread Product grades A and B
This standard specifies requirements for M6 to M52 hexagon slotted nuts and castle nuts, assigned to product grade A (up to size M16) or product grade B (for sizes above M16). If, in special cases, nuts are to comply with specifications other than those given in this standard, e.g. regarding pro...
1986
English
Knurled nuts
The following amendments have been made in comparison with the January 1971 edition a) The content of the standard has been editorially revised and aligned with the basic standards concerned b) The technical delivery conditions have been amended. c) The previous design m as specified in DIN 267 P...
1993
English
ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
This specification covers the requirements for six types and two classes of electrolytically formed anodic coatings on aluminum and aluminum alloys for non-architectural applications.